Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-PowerTSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Operating Temperature |
-55°C~125°C TJ |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Base Part Number |
TPS40021 |
Function |
Step-Down |
Number of Outputs |
1 |
Output Voltage |
4V |
Output Type |
Transistor Driver |
Operating Supply Voltage |
5.5V |
Input Voltage-Nom |
5V |
Analog IC - Other Type |
SWITCHING CONTROLLER |
Output Configuration |
Positive |
Output Current |
20A |
Voltage - Supply (Vcc/Vdd) |
2.25V~5.5V |
Quiescent Current |
1.5mA |
Control Features |
Current Limit, Enable, Frequency Control, Power Good, Soft Start |
Input Voltage (Min) |
2.25V |
Topology |
Buck |
Control Mode |
VOLTAGE-MODE |
Frequency - Switching |
100kHz~1MHz |
Control Technique |
PULSE WIDTH MODULATION |
Synchronous Rectifier |
Yes |
Switcher Configuration |
PUSH-PULL |
Max Frequency |
1.1MHz |
Max Duty Cycle |
95 % |
Height |
1.2mm |
Length |
5mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS40021MPWPREP Overview
It comes in a 16-PowerTSSOP (0.173, 4.40mm Width) package, so switching controller can be used for most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. A solid enclosure of Tape & Reel (TR) surrounds pmic. The system can process Transistor Driver dc switching's outputs (s). Voltages 2.25V~5.5V are the dc control's supply voltage and operating voltage, respectively. Qualified to work in an dc switcher with -55°C~125°C TJ. A switching controller such as this can switch at a value of 100kHz~1MHz . A generalization of dc dc regulator can be made using Surface Mount. To ensure efficient switching, this dcdc regulator features a Current Limit, Enable, Frequency Control, Power Good, Soft Start. A SWITCHING CONTROLLER analog IC is connected to the switch converters. There are a DUAL terminal on the switching converters. A variety of 16 terminations are available in dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's input voltageis set to 5V. Other relevant dc to dc converter ics can be found by searching "TPS40021". There are 16 pins on switching converter. It is recommended that the input voltage of the dc dc voltage regulator be 2.25V. A 4V voltage of DC regulator was detected in the test statistics. The dc dc regulator's usual output current is 20A, which should be noted down when you start a project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 95 %. DC switcher's Surface Mount qualifies it for most applications and prototypes. There is a maximum frequency of 1.1MHz for this dc regulators. A circuit should contain 5.5V in order to ensure the voltage regulator dc to dc runs safely and reliably. In a dormant state, the dc switching uses 1.5mA.
TPS40021MPWPREP Features
Transistor Driver Outputs
Switching Frequency: 100kHz~1MHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 95 %
TPS40021MPWPREP Applications
There are a lot of Texas Instruments TPS40021MPWPREP DC to DC converter applications.
- seismic instrument power circuits
- Television equipment
- Wide-range voltage regulation circuits
- Combined machine tools
- Scientific testing
- Flaw detection equipment
- Automatic testing equipment
- Medical monitoring systems
- Imported equipment
- Domestic water pumps