TPS40040DRBR

8 Terminals 2.25V~5.5V 8-Pin TPS40040 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 300kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-TPS40040DRBR
Package: 8-VDFN Exposed Pad
Datasheet: -
Stock: 335
Description: 8 Terminals 2.25V~5.5V 8-Pin TPS40040 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 300kHz Transistor Driver (Kg)

Details

Tags

Parameters
Quiescent Current	2mA
Control Features	Enable
Max Output Voltage	4.95V
Topology	Buck
Min Input Voltage	2.25V
Control Mode	VOLTAGE-MODE
Frequency - Switching	300kHz
Max Input Voltage	5.5V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	Yes
Min Output Voltage	600mV
Switcher Configuration	PUSH-PULL
Max Frequency	350kHz
Duty Cycle (Max)	95%
Clock Sync	No
Height	1mm
Length	3mm
Width	3mm
Thickness	880μm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mounting Type	Surface Mount
Package / Case	8-VDFN Exposed Pad
Surface Mount	YES
Number of Pins	8
Weight	24.012046mg
Operating Temperature	-40°C~125°C TJ
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 4.95V
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.65mm
Base Part Number	TPS40040
Function	Step-Down
Number of Outputs	1
Output Voltage	4.95V
Output Type	Transistor Driver
Max Output Current	15A
Operating Supply Voltage	5.5V
Input Voltage-Nom	5V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	15A
Voltage - Supply (Vcc/Vdd)	2.25V~5.5V

TPS40040DRBR Overview

Capsuled in the 8-VDFN Exposed Pad package, the switching controller suits most application needs. There is sufficient capacity to generate switching controller for outputs 1. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. Transistor Driver dc switching's outputs (s) can be handled by it. Voltages 2.25V~5.5V are the dc control's supply voltage and operating voltage, respectively. Suitable for work in a -40°C~125°C TJ dc switcher. Switching can be done at 300kHz with this switching controller. As it has a Surface Mount value, it can be used for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Enable. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. A switching converters's terminal (s) sits at the DUAL position. A variety of dc switching's functions can be performed on 8 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 5V. Other relevant dc to dc converter ics will be returned if you search "TPS40040". 8 pins are present on switching converter. Based on the test statistics, DC regulator outputs voltage 4.95V. It's important to remember that the dc dc regulator's normaloutput current is 15A, so you should note it down when starting a new project. DC regulator has a maximum frequency of 350kHz. As a result, DC to DC voltage regulator has a value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 4.95V so that the need can be met more directly. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 5.5V. During dormancy, the dc switching uses 2mA. The maximum input voltage of dc switcher is 5.5V, so users should limit their voltage accordingly. Voltage 2.25V must be supplied. A dc switcher can only produce an output current of 15A. Its datasheet indicates the switching converter can output a maximum of 4.95V volts. At least 600mV voltage is output by the voltage controller.