TPS40040DRBT

8 Terminals 2.25V~5.5V 8-Pin TPS40040 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 300kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-TPS40040DRBT
Package: 8-VDFN Exposed Pad
Datasheet: -
Stock: 782
Description: 8 Terminals 2.25V~5.5V 8-Pin TPS40040 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 300kHz Transistor Driver (Kg)

Details

Tags

Parameters
Length	3mm
Width	3mm
Thickness	880μm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mounting Type	Surface Mount
Package / Case	8-VDFN Exposed Pad
Surface Mount	YES
Number of Pins	8
Weight	24.012046mg
Operating Temperature	-40°C~125°C TJ
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 4.95V
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.65mm
Base Part Number	TPS40040
Function	Step-Down
Number of Outputs	1
Output Voltage	4.95V
Output Type	Transistor Driver
Max Output Current	15A
Operating Supply Voltage	5.5V
Input Voltage-Nom	5V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	15A
Voltage - Supply (Vcc/Vdd)	2.25V~5.5V
Quiescent Current	2mA
Control Features	Enable
Max Output Voltage	4.95V
Topology	Buck
Min Input Voltage	2.25V
Control Mode	VOLTAGE-MODE
Frequency - Switching	300kHz
Max Input Voltage	5.5V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	Yes
Min Output Voltage	600mV
Switcher Configuration	PUSH-PULL
Max Frequency	350kHz
Duty Cycle (Max)	95%
Clock Sync	No
Height	1mm

TPS40040DRBT Overview

It comes in the 8-VDFN Exposed Pad package, which makes switching controller suitable for most applications. It is sufficient to generate 1 outputs with this dc motor controller. An enclosure of Tape & Reel (TR) is used to package the PMIC. Transistor Driver dc switching's outputs (s) can be handled by it. A 2.25V~5.5V voltage is supplied to the dc control and used for operating it. Worked in a -40°C~125°C TJ dc switcher before. There is a switch at 300kHz that can be used with this controller. The Surface Mount allows it to be used for dc dc regulator in general. DCDC regulator is controlled efficiently by Enable. A SWITCHING CONTROLLER analog IC is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. A variety of 8 terminations are available in dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input is 5V. You can find other relevant dc to dc converter ics by searching "TPS40040". There are 8 pins on switching converter. DC regulator outputs 4.95V voltage based on test statistics. normally, the dc dc regulator's output current is 15A, which you should keep in mind when starting a project. It is estimated that this dc regulatorhas a maximum frequency of 350kHz. The value of DC to DC voltage regulator is set at ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 4.95V in order to fulfill the requirements more effectively. To operate the voltage regulator dc to dc safely and reliably, users should apply 5.5V. A dc switching in a dormant state uses 2mA. The maximum input voltage of dc switcher is 5.5V, so users should limit their voltage accordingly. Voltage 2.25V must be supplied. There will be 15A current output from the dc switcher above 15A. Datasheets indicate that the switching converter can output 4.95V volts at its maximum. voltage controllers with a minimum voltage output of 600mV cannot operate.