TPS40041DRBRG4

8 Terminals 2.25V~5.5V 8-Pin TPS40041 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 600kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-TPS40041DRBRG4
Package: 8-VDFN Exposed Pad
Datasheet: -
Stock: 975
Description: 8 Terminals 2.25V~5.5V 8-Pin TPS40041 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 600kHz Transistor Driver (Kg)

Details

Tags

Parameters
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.65mm
Base Part Number	TPS40041
Function	Step-Down
Number of Outputs	1
Output Voltage	4.95V
Output Type	Transistor Driver
Max Output Current	15A
Operating Supply Voltage	5.5V
Input Voltage-Nom	5V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	15A
Voltage - Supply (Vcc/Vdd)	2.25V~5.5V
Quiescent Current	2mA
Control Features	Enable
Max Output Voltage	4.84V
Topology	Buck
Min Input Voltage	2.25V
Control Mode	VOLTAGE-MODE
Frequency - Switching	600kHz
Max Input Voltage	5.5V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	Yes
Min Output Voltage	600mV
Switcher Configuration	PUSH-PULL
Max Frequency	700kHz
Duty Cycle (Max)	95%
Clock Sync	No
Height	1mm
Length	3mm
Width	3mm
Thickness	880μm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mounting Type	Surface Mount
Package / Case	8-VDFN Exposed Pad
Surface Mount	YES
Number of Pins	8
Weight	24.012046mg
Operating Temperature	-40°C~125°C TJ
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 4.95V

TPS40041DRBRG4 Overview

Capsuled in the 8-VDFN Exposed Pad package, the switching controller suits most application needs. This dc motor controller can be used to generate outputs with 1 numbers. PMIC packaging is solid with a Tape & Reel (TR) enclosure. With Transistor Driver dc switching's output (s), it is able to handle it. A 2.25V~5.5V voltage is supplied to the dc control and used for operating it. Qualified to work in a -40°C~125°C TJ dc switcher. Switching can be done at 600kHz with this switching controller. Surface Mount makes it suitable for general dc dc regulator. Enable is used for efficient switching control in the dcdc regulator. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. Terminal (s) of the switching converters are designed at the DUAL position. An array of 8 terminations of dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's input voltageis 5V volts. Search for "TPS40041" to find other relevant dc to dc converter ics. In total, switching converter has 8 pins. Test statistics indicate DC regulator outputs 4.95V voltage. If you start a project, note down the dc dc regulator's usual output current of 15A. DC regulator has a maximum frequency of 700kHz. To better satisfy the need, DC to DC voltage regulator has a value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 4.95V. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 5.5V. In a dormant state, the dc switching uses 2mA. Users must limit the voltage accordingly because the dc switcher's maximum input voltage is 5.5V. Voltage 2.25V is needed for the supply. Output current will not exceed 15A. The switching converter can output 4.84V volts at its utmost, according to the datasheet. Its lowest voltage output is not less than 600mV.