TPS40041DRBT

8 Terminals 2.25V~5.5V 8-Pin TPS40041 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 600kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-TPS40041DRBT
Package: 8-VDFN Exposed Pad
Datasheet: -
Stock: 921
Description: 8 Terminals 2.25V~5.5V 8-Pin TPS40041 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 600kHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Contact Plating	Gold
Mounting Type	Surface Mount
Package / Case	8-VDFN Exposed Pad
Surface Mount	YES
Number of Pins	8
Weight	24.012046mg
Operating Temperature	-40°C~125°C TJ
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	8
ECCN Code	EAR99
Additional Feature	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 4.95V
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.65mm
Base Part Number	TPS40041
Function	Step-Down
Number of Outputs	1
Output Voltage	4.95V
Output Type	Transistor Driver
Max Output Current	15A
Operating Supply Voltage	5.5V
Input Voltage-Nom	5V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	15A
Voltage - Supply (Vcc/Vdd)	2.25V~5.5V
Quiescent Current	2mA
Control Features	Enable
Max Output Voltage	4.84V
Topology	Buck
Min Input Voltage	2.25V
Control Mode	VOLTAGE-MODE
Frequency - Switching	600kHz
Max Input Voltage	5.5V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	Yes
Min Output Voltage	600mV
Switcher Configuration	PUSH-PULL
Max Frequency	700kHz
Max Duty Cycle	88 %
Duty Cycle (Max)	95%
Clock Sync	No
Height	1mm
Length	3mm
Width	3mm
Thickness	880μm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

TPS40041DRBT Overview

Capsuled in the 8-VDFN Exposed Pad package, the switching controller can be used for a wide range of applications. The dc motor controller is adquate to generate for 1 outputs. An enclosure of Tape & Reel (TR) is used to package the PMIC. Transistor Driver dc switching's outputs (s) can be handled by it. dc controls with 2.25V~5.5V voltage are supplied and operated. Work well in dc switchers with a -40°C~125°C TJ. Switching can be done at 600kHz with this switching controller. The Surface Mount value makes it suitable for general dc dc regulator. Enable is used for efficient switching control in the dcdc regulator. An analog IC SWITCHING CONTROLLER is connected to the switch converters. There are a DUAL terminal on the switching converters. A variety of terminations with 8 of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 5V. In addition to "TPS40041", there are other relevant dc to dc converter ics you can find. 8 pins are on switching converter. Statistically, DC regulator outputs 4.95V volts. normally, the dc dc regulator's output current is 15A, which you should keep in mind when starting a project. It is set to 88 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. There is a maximum frequency of 700kHz for this dc regulators. Hence, ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 4.95V is used to better suit the DC to DC voltage regulator's situation. It is suggested that users apply 5.5V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. DC switching uses 2mA when it is dormant. Since the dc switcher's maximum input voltage is 5.5V, the voltage must be regulated accordingly. A voltage of 2.25V is required for the supply. There will be 15A current output from the dc switcher above 15A. A datasheet states that the switching converter can output 4.84V volts at its maximum. Lowest voltage output of the voltage controller must be greater than 600mV.

TPS40041DRBT Features

Transistor Driver Outputs
Switching Frequency: 600kHz
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 88 %
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 4.95V