TPS40041DRBTG4

8 Terminals 2.25V~5.5V 8-Pin TPS40041 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 600kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-TPS40041DRBTG4
Package: 8-VDFN Exposed Pad
Datasheet: -
Stock: 577
Description: 8 Terminals 2.25V~5.5V 8-Pin TPS40041 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 600kHz Transistor Driver (Kg)

Details

Tags

Parameters
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	15A
Voltage - Supply (Vcc/Vdd)	2.25V~5.5V
Quiescent Current	2mA
Control Features	Enable
Max Output Voltage	4.84V
Topology	Buck
Min Input Voltage	2.25V
Control Mode	VOLTAGE-MODE
Frequency - Switching	600kHz
Max Input Voltage	5.5V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	Yes
Min Output Voltage	600mV
Switcher Configuration	PUSH-PULL
Max Frequency	700kHz
Duty Cycle (Max)	95%
Clock Sync	No
Height	1mm
Length	3mm
Width	3mm
Thickness	880μm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Mounting Type	Surface Mount
Package / Case	8-VDFN Exposed Pad
Surface Mount	YES
Number of Pins	8
Weight	24.012046mg
Operating Temperature	-40°C~125°C TJ
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 4.95V
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.65mm
Base Part Number	TPS40041
Function	Step-Down
Number of Outputs	1
Output Voltage	4.95V
Output Type	Transistor Driver
Max Output Current	15A
Operating Supply Voltage	5.5V
Input Voltage-Nom	5V

TPS40041DRBTG4 Overview

With a 8-VDFN Exposed Pad package, the switching controller is suitable for a wide range of applications. dc motor controller is suitable for 1 output generation. There is a Tape & Reel (TR) solid enclosure around the pmic. Transistor Driver dc switching's outputs (s) can be handled by it. 2.25V~5.5V is the operating voltage and supply voltage of the dc control. Worked in an dc switcher with a -40°C~125°C TJ rating. The switching controller is capable of switching at the 600kHz position. A generalization of dc dc regulator can be made using Surface Mount. For efficient switching control, the dcdc regulator features Enable. The switch converters are connected to a SWITCHING CONTROLLER analog IC. Thare switching converters has a terminal (s) at DUAL . 8 terminations with a variety of function. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's input voltageis set to 5V. Other relevant dc to dc converter ics can be found by searching "TPS40041". Switching converter has a total of 8 pins. According to the test statistics, DC regulator outputs 4.95V voltage. The dc dc regulator's usual output current is 15A, which should be noted down when you start a project. This dc regulatorhas a max frequency of 700kHz. DC to DC voltage regulator has a value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 4.95V to better satisfy the need. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 5.5V. Dormant dc switchings use 2mA. The dc switcher's maximum input voltage is 5.5V, so users must limit the voltage accordingly. Switching controller is necessary to have a supply voltage of 2.25V. There will be 15A output current greater than 15A from the dc switcher. Depending on the datasheet, the switching converter can output 4.84V volts at its peak. 600mV voltage output is lower than 600mV.