TPS40050PWPRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 62.709145mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS40050 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 40V |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200μA |
| Voltage - Supply (Vcc/Vdd) | 8V~40V |
| Control Features | Current Limit, Enable, Frequency Control, Soft Start |
| Input Voltage (Min) | 8V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Duty Cycle (Max) | 94% |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40050PWPRG4 Overview
It comes in the 16-PowerTSSOP (0.173, 4.40mm Width) package, which makes switching controller suitable for most applications. It is sufficient to generate 1 outputs with this dc motor controller. An enclosure of Tape & Reel (TR) is used to package the PMIC. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sVoltages 8V~40V are the dc control's supply voltage and operating voltage, respectively. Worked in a -40°C~85°C TA dc switcher before. With this switching controller, you can switch at 500kHz. Surface Mount makes it suitable for general dc dc regulator. Switching control is made easier with the dcdc regulator's Current Limit, Enable, Frequency Control, Soft Start. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. The switching converters's terminal (s) are designed at DUAL . There are many different types of terminations for 16. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's voltage input is 24V. Other relevant dc to dc converter ics will be returned if you search "TPS40050". The switching converter has a total of 16 pins. Specially, switching converter corresponds to type Switching Regulator or Controllers. It is recommended that the input voltage of the dc dc voltage regulator be 8V. The test statistics indicate that DC regulator outputs a voltage of 6V. A starting point for a project is to note down the dc dc regulator's usual output current, which is 200μA. The Surface Mount makes DC switcher suitable for most applications and prototypes. There is a maximum frequency of 1MHz on this dc regulators. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 40V.
TPS40050PWPRG4 Features
Transistor Driver Outputs
Switching Frequency: 500kHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
TPS40050PWPRG4 Applications
There are a lot of Texas Instruments TPS40050PWPRG4 DC to DC converter applications.
- Radio equipment
- Scientific testing
- Hydro power
- Flaw detection equipment
- Access control systems
- Lathes
- Elevator lighting
- Cutting machine tools
- Automatic plug-in machines
- Electric water heaters
