TPS40051QPWPRQ1
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 62.312252mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS40051 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 35V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 40V |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 8V~40V |
| Quiescent Current | 1.5mA |
| Control Features | Current Limit, Enable, Frequency Control, Soft Start |
| Input Voltage (Min) | 8V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Max Duty Cycle | 85 % |
| Duty Cycle (Max) | 94% |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40051QPWPRQ1 Overview
In the 16-PowerTSSOP (0.173, 4.40mm Width) package, the switching controller meets most application requirements. The dc motor controller is adquate to generate for 1 outputs. A solid enclosure of Cut Tape (CT) surrounds pmic. The program can handle Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 8V~40V. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. The switching controller can be switched at Up to 1MHz. dc dc regulator is made easier with Surface Mount. Current Limit, Enable, Frequency Control, Soft Start provides dcdc regulator efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. There are a terminal (s) on the switching converters that are designed at DUAL. A variety of terminations with 16 of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. DC switcher's input voltageis 24V volts. You can find other relevant dc to dc converter ics by searching "TPS40051". 16 pins are present on switching converter. It is recommended to use 8V as the minimum input voltage of dc dc voltage regulator. Test statistics indicate DC regulator outputs 35V voltage. voltage regulator dc to dcs with a 85 % duty cycle are designed to be reliable when powered on and powered off. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sIt is estimated that this dc regulatorhas a maximum frequency of 1MHz. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 40V. It belongs to the dc to dc voltage regulator series Automotive, AEC-Q100. A dc switching in a dormant state uses 1.5mA.
TPS40051QPWPRQ1 Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 85 %
TPS40051QPWPRQ1 Applications
There are a lot of Texas Instruments TPS40051QPWPRQ1 DC to DC converter applications.
- Industrial controllers
- Lathes
- Mobile phones
- Imported equipment
- Network technology
- Medical monitoring systems
- Large fire protection systems
- Hydrogen power
- Machining centers
- SMT equipment
