TPS40053PWPR
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 62.709145mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 500kHz |
| Base Part Number | TPS40053 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 35V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 40V |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 8V~40V |
| Control Features | Current Limit, Enable, Frequency Control, Soft Start |
| Input Voltage (Min) | 8V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 94% |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40053PWPR Overview
This switching controller fits most application requirements since it is packaged in a 16-PowerTSSOP (0.173, 4.40mm Width) package. It is sufficient to generate 1 outputs with this dc motor controller. PMIC packaging is solid with a Tape & Reel (TR) enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching's8V~40V is the operating voltage and supply voltage of the dc control. Suitable for working in an dc switcher that has a -40°C~85°C TA. As it has a Surface Mount value, it can be used for general dc dc regulator. For efficient switching control, the dcdc regulator features Current Limit, Enable, Frequency Control, Soft Start. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. A variety of dc switching's functions can be performed on 16 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 24V. Searching "TPS40053" will return other relevant dc to dc converter ics. Total pins of switching converter are 16. There is a particular type of Switching Regulator or Controllers in switching converter. This dc dc voltage regulator should be powered by a voltage of 8V. The test statistics indicate that DC regulator outputs a voltage of 35V. In most cases, the output current of the dc dc regulator will be 20A, so note that when you start the project. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. Switching controllers operate at 500kHz frequencies. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 40V.
TPS40053PWPR Features
Transistor Driver Outputs
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Frequency: 500kHz
TPS40053PWPR Applications
There are a lot of Texas Instruments TPS40053PWPR DC to DC converter applications.
- Digital video recorders
- Communication system
- Post equipment
- Handheld GPS
- Nuclear power plants
- Wind power
- Overvoltage protection circuits in TV sets
- Electric heating, lighting
- Textile machinery
- Computer rooms
