TPS40054PWP
| Parameters | |
|---|---|
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Duty Cycle (Max) | 94% |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | NRND (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 62.709145mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | TPS40054 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 35V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 8V~40V |
| Quiescent Current | 1.5mA |
| Control Features | Current Limit, Enable, Frequency Control, Soft Start |
| Input Voltage (Min) | 8V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 1MHz |
| Input Voltage (Max) | 40V |
| Control Technique | PULSE WIDTH MODULATION |
TPS40054PWP Overview
It comes in the 16-PowerTSSOP (0.173, 4.40mm Width) package, which makes switching controller suitable for most applications. 1 outputs can be generated with the dc motor controller. There is a Tube solid enclosure around the pmic. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching's8V~40V is the supply voltage and the operating voltage of the dc control. Suitable for work in a -40°C~85°C TA dc switcher. With this switching controller, you can switch at Up to 1MHz. It is suitable for general dc dc regulator when it is set to Surface Mount. Switching control is made easier with the dcdc regulator's Current Limit, Enable, Frequency Control, Soft Start. A SWITCHING CONTROLLER analog IC is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . Different dc switching's functions can be applied to 16 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 24V. You can find other relevant dc to dc converter ics by searching "TPS40054". There are only 16 pins on switching converter. Switching converter type is specifically Switching Regulator or Controllers. It is recommended that the input voltage of the dc dc voltage regulator be 8V. A 35V voltage of DC regulator was detected in the test statistics. This dc to dc regulator accepts only 40V input voltage at most. The dc dc regulator's usual output current is 20A, which should be noted down when you start a project. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sDC regulator1MHz has the maximum frequency. In a dormant state, the dc switching uses 1.5mA.
TPS40054PWP Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
TPS40054PWP Applications
There are a lot of Texas Instruments TPS40054PWP DC to DC converter applications.
- Television equipment
- Thermal power
- Correction machines
- Industrial robots
- Sensitive electronic devices
- Terrestrial set-top boxes
- Series voltage regulation circuits
- Post equipment
- CNC system
- Cutting machine tools
