TPS40054PWPG4
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 62.709145mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 520kHz |
| Base Part Number | TPS40054 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 35V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 8V~40V |
| Quiescent Current | 1.5mA |
| Control Features | Current Limit, Enable, Frequency Control, Soft Start |
| Max Output Voltage | 6V |
| Topology | Buck |
| Min Input Voltage | 8V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 1MHz |
| Max Input Voltage | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Nominal Input Voltage | 24V |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 94 % |
| Input Current | 5mA |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40054PWPG4 Overview
Capsuled in the 16-PowerTSSOP (0.173, 4.40mm Width) package, the switching controller suits most application needs. It is sufficient to generate 1 outputs with this dc motor controller. PMIC is packaged in a solid enclosure of Tube. With Transistor Driver dc switching's output (s), it is able to handle it. The supply and operating voltage of the dc control are 8V~40V. Suitable for work in a -40°C~85°C TA dc switcher. This switching controller can switch at Up to 1MHz. It is suitable for general dc dc regulator when it is set to Surface Mount. Current Limit, Enable, Frequency Control, Soft Start is used for efficient switching control in the dcdc regulator. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. An array of 16 terminations of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. DC switcher's input voltageis set to 24V. Other relevant dc to dc converter ics will be returned if you search "TPS40054". Switching converter has a total of 16 pins. The type is a particular Switching Regulator or Controllers of switching converter. The test statistics indicate that DC regulator outputs a voltage of 35V. The dc dc regulator's usual output current is 20A, which should be noted down when you start a project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 94 % during power-up and power-down. The Surface Mount makes DC switcher suitable for most applications and prototypes. There is 520kHz frequency setting on the switching controller. In a dormant state, the dc switching uses 1.5mA. Input voltage can be set to 24V for nominal working status. Since the dc switcher's maximum input voltage is 40V, the voltage must be regulated accordingly. In order to use a 8V voltage supply, switching controller is necessary to have one. The datasheet indicates that the switching converter can output 6V volts at its maximum. An input flow rate of 5mA could satisfy the switching converter 's operation requirements.
TPS40054PWPG4 Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 94 %
Frequency: 520kHz
TPS40054PWPG4 Applications
There are a lot of Texas Instruments TPS40054PWPG4 DC to DC converter applications.
- Access control systems
- Mobile phones
- Experimental setup
- Solar power plants
- Ball screw pair
- Analog precision reference circuits
- Fire elevators
- Driver circuits
- USB circuits
- Hydro power
