TPS40054PWPRG4
| Parameters | |
|---|---|
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | NRND (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 62.709145mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | TPS40054 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 35V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 40V |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 8V~40V |
| Quiescent Current | 1.5mA |
| Control Features | Current Limit, Enable, Frequency Control, Soft Start |
| Input Voltage (Min) | 8V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Duty Cycle (Max) | 94% |
| Height | 1.2mm |
| Length | 5mm |
TPS40054PWPRG4 Overview
This switching controller fits most application requirements since it is packaged in a 16-PowerTSSOP (0.173, 4.40mm Width) package. For 1 outputs, the dc motor controller is appropriate. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. With this function, you can deal with Transistor Driver dc switching's outputs (s). dc controls with 8V~40V voltage are supplied and operated. Suitable for a -40°C~85°C TA dc switcher. The switching controller can be switched at Up to 1MHz. The Surface Mount makes it ideal for general dc dc regulator. Featured in the dcdc regulator is Current Limit, Enable, Frequency Control, Soft Start which allows efficient switching control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. 16 terminations with a variety of function. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 24V. You can find other relevant dc to dc converter ics by searching "TPS40054". The switching converter has a total of 16 pins. There is a particular type of Switching Regulator or Controllers in switching converter. It is recommended to use 8V as the minimum input voltage of dc dc voltage regulator. Statistically, the DC regulator outputs 35V voltage. You should note that the dc dc regulator's usual output current is 20A. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. DC regulator has a maximum frequency of 1MHz. To run the voltage regulator dc to dc safely and reliably, users should apply 40V to the voltage regulator dc to dc. A dc switching in a dormant state uses 1.5mA.
TPS40054PWPRG4 Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
TPS40054PWPRG4 Applications
There are a lot of Texas Instruments TPS40054PWPRG4 DC to DC converter applications.
- Milling machines
- Special machining machine tools
- Medical monitoring systems
- Imported equipment
- Plate bending machines
- Lathes
- Arc suppression circuits
- Serial communication converter
- Game consoles
- Alternators
