TPS40055PWP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 21 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 62.709145mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | TPS40055 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 35V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 8V~40V |
| Quiescent Current | 1.5mA |
| Control Features | Current Limit, Enable, Frequency Control, Soft Start |
| Max Output Voltage | 6V |
| Topology | Buck |
| Min Input Voltage | 8V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 1MHz |
| Max Input Voltage | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Duty Cycle (Max) | 94% |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40055PWP Overview
It comes in the 16-PowerTSSOP (0.173, 4.40mm Width) package, which makes switching controller suitable for most applications. 1 outputs can be generated with the dc motor controller. The pmic is packaged in Tube solid enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sdc controls with 8V~40V voltage are supplied and operated. Qualified to work in a -40°C~85°C TA dc switcher. There is a switch at Up to 1MHz that can be used with this controller. dc dc regulator is made easier with Surface Mount. The dcdc regulator features Current Limit, Enable, Frequency Control, Soft Start for efficient switching control. SWITCHING CONTROLLER analog IC connects the switch converters. The switching converters's terminal (s) are designed at DUAL . Different dc switching's functions can be applied to 16 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. 24V nominal DC switcher's voltage input. TPS40055 can be used to locate other relevant dc to dc converter ics. Switching converter has a total of 16 pins. Statistically, the DC regulator outputs 35V voltage. If you start a project, note down the dc dc regulator's usual output current of 20A. DC switcher's Surface Mount qualifies it for most applications and prototypes. This dc regulatorhas a max frequency of 1MHz. In a dormant state, the dc switching uses 1.5mA. The maximum input voltage of the dc switcher is 40V, so users need to limit the voltage accordingly. There must be a 8V supply voltage. As per its datasheet, the switching converter has a maximum output of 6V volts.
TPS40055PWP Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
TPS40055PWP Applications
There are a lot of Texas Instruments TPS40055PWP DC to DC converter applications.
- Driver circuits
- Low output voltage switching power supply circuits
- Injection molding machinery
- Automatic testing equipment
- Program control systems
- Household control circuits
- Lathes
- Hydraulic presses
- Post equipment
- Linear guide
