TPS40055PWPRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 62.709145mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | TPS40055 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 35V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 40V |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 8V~40V |
| Quiescent Current | 1.5mA |
| Control Features | Current Limit, Enable, Frequency Control, Soft Start |
| Input Voltage (Min) | 8V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Duty Cycle (Max) | 94% |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40055PWPRG4 Overview
The switching controller fits in the 16-PowerTSSOP (0.173, 4.40mm Width) package and is ideal for most applications. The dc motor controller is adquate to generate for 1 outputs. PMIC packaging is solid with a Tape & Reel (TR) enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). dc controls with 8V~40V voltage are supplied and operated. A -40°C~85°C TA dc switcher is not a problem. Using this switching controller, it is possible to switch at Up to 1MHz. The Surface Mount allows it to be used for dc dc regulator in general. Switching control is made easier with the dcdc regulator's Current Limit, Enable, Frequency Control, Soft Start. The switch converters are connected to a SWITCHING CONTROLLER analog IC. The switching converters's terminal (s) are designed at DUAL . Different dc switching's functions can be applied to 16 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. 24V nominal DC switcher's voltage input. Other relevant dc to dc converter ics will be returned if you search "TPS40055". Pins number 16 of switching converter in total. An input voltage of 8V is the minimum required for the dc dc voltage regulator. DC regulator outputs 35V voltage according to the test statistics. You should note down the dc dc regulator's usual output current of 20A when you start a project. DC switcher's Surface Mount qualifies it for most applications and prototypes. DC regulators have a maximum frequency of 1MHz. A circuit should contain 40V in order to ensure the voltage regulator dc to dc runs safely and reliably. During dormancy, the dc switching uses 1.5mA.
TPS40055PWPRG4 Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
TPS40055PWPRG4 Applications
There are a lot of Texas Instruments TPS40055PWPRG4 DC to DC converter applications.
- Household control circuits
- Low output voltage switching power supply circuits
- Hydraulic presses
- Constant current circuits
- Correction machines
- Geothermal power
- Machining centers
- Automatic plug-in machines
- Injection molding machinery
- Smart grid
