TPS40056PWP
| Parameters | |
|---|---|
| Base Part Number | TPS40056 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 35V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 1.5mA |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 10V~40V |
| Quiescent Current | 1.5mA |
| Control Features | Current Limit, Enable, Frequency Control, Soft Start |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100kHz~1MHz |
| Input Voltage (Max) | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Duty Cycle (Max) | 90% |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 62.709145mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 1MHz |
TPS40056PWP Overview
The switching controller fits in the 16-PowerTSSOP (0.173, 4.40mm Width) package and is ideal for most applications. For outputs of 1, this dc motor controller is suitable. There is a Tube solid enclosure around the pmic. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThis dc control has a supply voltage and operating voltage of 10V~40V. Worked in a -40°C~85°C TA dc switcher before. There is a switch at 100kHz~1MHz that can be used with this controller. The Surface Mount allows it to be used for dc dc regulator in general. Switching control is made easier with the dcdc regulator's Current Limit, Enable, Frequency Control, Soft Start. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. The switching converters's terminal (s) are designed at DUAL . An array of 16 terminations of dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's voltage input of 12V. TPS40056 can be searched for other relevant dc to dc converter ics. In total, switching converter has 16 pins. A 35V voltage of DC regulator was detected in the test statistics. The dc to dc regulator can only accept 40V input voltage. You should note down the dc dc regulator's usual output current of 20A when you start a project. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. Switching controllers work at 1MHz Hz. During dormancy, the dc switching uses 1.5mA. It runs on a supply current of 1.5mA.
TPS40056PWP Features
Transistor Driver Outputs
Switching Frequency: 100kHz~1MHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Frequency: 1MHz
TPS40056PWP Applications
There are a lot of Texas Instruments TPS40056PWP DC to DC converter applications.
- Household control circuits
- Laboratories
- Series voltage regulation circuits
- Power supplies of electronic gadgets
- Special machining machine tools
- Automation technology
- Surface processing equipment
- Injection molding machinery
- Computer rooms
- Television equipment
