TPS40056PWPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 62.709145mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | TPS40056 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 35V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 40V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 1.5mA |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 10V~40V |
| Quiescent Current | 1.5mA |
| Control Features | Current Limit, Enable, Frequency Control, Soft Start |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100kHz~1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Max Frequency | 1MHz |
| Duty Cycle (Max) | 90% |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TPS40056PWPR Overview
With a 16-PowerTSSOP (0.173, 4.40mm Width) package, the switching controller is suitable for a wide range of applications. This dc motor controller can be used to generate outputs with 1 numbers. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. A total of Transistor Driver dc switching's outputs can be handled by it. Voltages 10V~40V are the dc control's supply voltage and operating voltage, respectively. Worked in a -40°C~85°C TA dc switcher before. The switching controller can be switched at 100kHz~1MHz. Surface Mount makes it suitable for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Current Limit, Enable, Frequency Control, Soft Start. A SWITCHING CONTROLLER analog IC is connected to the switch converters. DUAL are the position of the terminal of the switching converters. 16 terminations with a variety of function. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. Search for "TPS40056" to find other relevant dc to dc converter ics. Total pins of switching converter are 16. Statistically, DC regulator outputs 35V volts. In most cases, the output current of the dc dc regulator will be 20A, so note that when you start the project. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. 1MHz is the maximum frequency of this dc regulators. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 40V. Dormant dc switchings use 1.5mA. 1.5mA volts is the supply current.
TPS40056PWPR Features
Transistor Driver Outputs
Switching Frequency: 100kHz~1MHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
TPS40056PWPR Applications
There are a lot of Texas Instruments TPS40056PWPR DC to DC converter applications.
- Communication system
- Automation technology
- Ball screw pair
- Production lines
- Surface processing equipment
- Correction machines
- Various precision measuring instruments
- Digital display device
- Imported equipment
- Emergency lighting monitoring equipment
