TPS40056PWPRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 62.709145mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS40056 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 35V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 40V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 1.5mA |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 10V~40V |
| Quiescent Current | 1.5mA |
| Control Features | Current Limit, Enable, Frequency Control, Soft Start |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100kHz~1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Max Frequency | 1MHz |
| Duty Cycle (Max) | 90% |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TPS40056PWPRG4 Overview
In the 16-PowerTSSOP (0.173, 4.40mm Width) package, the switching controller meets most application requirements. This dc motor controller can be used to generate outputs with 1 numbers. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sVoltages 10V~40V are the dc control's supply voltage and operating voltage, respectively. Qualified to work in a -40°C~85°C TA dc switcher. It can switch at 100kHz~1MHz. The Surface Mount makes it ideal for general dc dc regulator. Current Limit, Enable, Frequency Control, Soft Start is used for efficient switching control in the dcdc regulator. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. DUAL are the position of the terminal of the switching converters. A variety of terminations with 16 of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 12V is input. TPS40056 can be used to locate other relevant dc to dc converter ics. The switching converter has a total of 16 pins. Statistically, the DC regulator outputs 35V voltage. In most cases, the dc dc regulator's output current is 20A. This information should be noted when you begin working with the component. This Surface Mount makes DC switcher suitable for most prototypes and applications. DC regulator has a maximum frequency of 1MHz. When running the voltage regulator dc to dc in a circuit, users should apply 40V to ensure safety and reliability. Dormant dc switchings use 1.5mA. A supply current of 1.5mA is used to power it.
TPS40056PWPRG4 Features
Transistor Driver Outputs
Switching Frequency: 100kHz~1MHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
TPS40056PWPRG4 Applications
There are a lot of Texas Instruments TPS40056PWPRG4 DC to DC converter applications.
- Experimental setup
- Analog precision reference circuits
- Solar power plants
- seismic instrument power circuits
- Flaw detection equipment
- Geothermal power
- Lathes
- Computed tomography (CT)
- Automatic testing equipment
- Medical monitoring systems
