TPS40057PWP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 62.709145mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | TPS40057 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 35V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 40V |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 8V~40V |
| Quiescent Current | 1.5mA |
| Control Features | Current Limit, Enable, Frequency Control, Soft Start |
| Max Output Voltage | 6V |
| Topology | Buck |
| Min Input Voltage | 8V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 1MHz |
| Max Input Voltage | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Duty Cycle (Max) | 94% |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40057PWP Overview
With its 16-PowerTSSOP (0.173, 4.40mm Width) package, the switching controller fits the needs of most applications. The dc motor controller is adquate to generate for 1 outputs. Tube is the solid enclosure in which PMIC is packaged. The system can process Transistor Driver dc switching's outputs (s). Voltages 8V~40V are the dc control's supply voltage and operating voltage, respectively. Suitable for work in a -40°C~85°C TA dc switcher. A switching controller such as this can switch at a value of Up to 1MHz . dc dc regulators can be carried out with Surface Mount. To ensure efficient switching, this dcdc regulator features a Current Limit, Enable, Frequency Control, Soft Start. An analog IC SWITCHING CONTROLLER is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. An array of 16 terminations of dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's voltage input of 24V. Search for "TPS40057" to find other relevant dc to dc converter ics. 16 pins are on switching converter. Statistically, DC regulator outputs 35V volts. In most cases, the output current of the dc dc regulator will be 20A, so note that when you start the project. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sDC regulator has a maximum frequency of 1MHz. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 40V. When the dc switching is dormant, it uses 1.5mA. The dc switcher's maximum input voltage is 40V; users must limit it accordingly. In order to use a 8V voltage supply, switching controller is necessary to have one. The datasheet indicates that the switching converter can output 6V volts at its maximum.
TPS40057PWP Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
TPS40057PWP Applications
There are a lot of Texas Instruments TPS40057PWP DC to DC converter applications.
- Hydro power
- Bending machines
- Milling machines
- Driver circuits
- Motor controller circuits
- Computer rooms
- Solar power plants
- Automation technology
- Series voltage regulation circuits
- Digital video recorders
