TPS40060PWPG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 62.709145mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 300kHz |
| Base Part Number | TPS40060 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 10V~55V |
| Quiescent Current | 1.5mA |
| Control Features | Current Limit, Enable, Frequency Control, Soft Start |
| Max Output Voltage | 6V |
| Topology | Buck |
| Min Input Voltage | 10V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 1MHz |
| Max Input Voltage | 55V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Input Current | 5mA |
| Duty Cycle (Max) | 98% |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40060PWPG4 Overview
It comes in the 16-PowerTSSOP (0.173, 4.40mm Width) package, which makes switching controller suitable for most applications. For outputs of 1, this dc motor controller is suitable. There is a Tube solid enclosure around the pmic. With Transistor Driver dc switching's output (s), it is able to handle it. A 10V~55V voltage is supplied to the dc control and used for operating it. Work well in dc switchers with a -40°C~85°C TA. There is a switch at Up to 1MHz that can be used with this controller. It is suitable for general dc dc regulator when it is set to Surface Mount. Featured in the dcdc regulator is Current Limit, Enable, Frequency Control, Soft Start which allows efficient switching control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. DUAL are the position of the terminal of the switching converters. There are many different types of terminations for 16. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's voltage input is 24V. In addition to "TPS40060", there are other relevant dc to dc converter ics you can find. There are 16 pins on switching converter. Test statistics indicate DC regulator outputs 6V voltage. It's important to remember that the dc dc regulator's normaloutput current is 10A, so you should note it down when starting a new project. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. The switching controller works at a frequency of 300kHz. When the dc switching is dormant, it uses 1.5mA. The dc switcher's maximum input voltage is 55V; users must limit it accordingly. There must be a 10V supply voltage. At its maximum output, the switching converter can provide 6V volts. An input flow rate of 5mA could satisfy the switching converter 's operation requirements.
TPS40060PWPG4 Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Frequency: 300kHz
TPS40060PWPG4 Applications
There are a lot of Texas Instruments TPS40060PWPG4 DC to DC converter applications.
- Radio equipment
- Product burn-in
- Computer monitoring equipment of building
- Cutting machine tools
- Constant current circuits
- Packaging
- Machining centers
- Product testing
- Hydraulic presses
- Correction machines
