TPS40061PWP
| Parameters | |
|---|---|
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 10V~55V |
| Quiescent Current | 1.5mA |
| Control Features | Current Limit, Enable, Frequency Control, Soft Start |
| Max Output Voltage | 6V |
| Topology | Buck |
| Min Input Voltage | 10V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 1MHz |
| Max Input Voltage | 55V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 98% |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 62.709145mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 1MHz |
| Base Part Number | TPS40061 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 45V |
| Output Type | Transistor Driver |
TPS40061PWP Overview
With a 16-PowerTSSOP (0.173, 4.40mm Width) package, the switching controller is suitable for a wide range of applications. For 1 outputs, the dc motor controller is appropriate. An enclosure of Tube is used to package the PMIC. The program can handle Transistor Driver dc switching's outputs (s). 10V~55V is the operating voltage and supply voltage of the dc control. Suitable for working in an dc switcher that has a -40°C~85°C TA. Using this switching controller, it is possible to switch at Up to 1MHz. dc dc regulators can be carried out with Surface Mount. Featured in the dcdc regulator is Current Limit, Enable, Frequency Control, Soft Start which allows efficient switching control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. A variety of dc switching's functions can be performed on 16 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 24V. TPS40061 can be used to locate other relevant dc to dc converter ics. 16 pins are present on switching converter. According to the test statistics, DC regulator outputs 45V voltage. You should note down the dc dc regulator's usual output current of 10A when you start a project. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sSwitching controller operates at a frequency of 1MHz. Dormant dc switchings use 1.5mA. Because the dc switcher's maximum input voltage is 55V users must limit the voltage accordingly. Voltage 10V is needed for the supply. Datasheets indicate that the switching converter can output 6V volts at its maximum.
TPS40061PWP Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Frequency: 1MHz
TPS40061PWP Applications
There are a lot of Texas Instruments TPS40061PWP DC to DC converter applications.
- Packaging
- Scientific research
- Hydrogen power
- Current source circuits
- Serial communication converter
- Computer-related products
- Milling machines
- PSRR circuits
- seismic instrument power circuits
- Digital display device
