TPS40061PWPG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 62.709145mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | TPS40061 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 45V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 55V |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 10V~55V |
| Quiescent Current | 1.5mA |
| Control Features | Current Limit, Enable, Frequency Control, Soft Start |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Duty Cycle (Max) | 98% |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40061PWPG4 Overview
As a result of 16-PowerTSSOP (0.173, 4.40mm Width) compact design, the switching controller is compatible with most applications. There is sufficient capacity to generate switching controller for outputs 1. Packaged in solid enclosures, this pmic has a Tube rating. It is capable of handling Transistor Driver dc switching's outputs (s). A 10V~55V voltage is supplied to the dc control and used for operating it. Worked in a -40°C~85°C TA dc switcher before. In this switching controller, the switch can be set to Up to 1MHz. dc dc regulator can be generalized using Surface Mount. To provide efficient switching control, Current Limit, Enable, Frequency Control, Soft Start is included in the dcdc regulator. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. A variety of 16 terminations are available in dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 24V is input. You can find other relevant dc to dc converter ics by searching "TPS40061". 16 pins are present on switching converter. Test statistics indicate DC regulator outputs 45V voltage. In most cases, the output current of the dc dc regulator will be 10A, so note that when you start the project. This Surface Mount makes DC switcher suitable for most prototypes and applications. This dc regulatorhas a max frequency of 1MHz. Users should apply 55V to operate the voltage regulator dc to dc safely and reliably. In dormant mode, 1.5mA is used.
TPS40061PWPG4 Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
TPS40061PWPG4 Applications
There are a lot of Texas Instruments TPS40061PWPG4 DC to DC converter applications.
- Fire elevators
- Surge protection circuits
- Communication system
- Photovoltaic power
- Planers
- Gear/thread machining machines
- Pipe bending machines
- Electrical distribution systems
- Serial communication converter
- Medical equipment
