TPS40061PWPRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 62.709145mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | TPS40061 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 45V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 55V |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 10V~55V |
| Quiescent Current | 1.5mA |
| Control Features | Current Limit, Enable, Frequency Control, Soft Start |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Duty Cycle (Max) | 98% |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40061PWPRG4 Overview
With its 16-PowerTSSOP (0.173, 4.40mm Width) package, the switching controller fits the needs of most applications. This dc motor controller can be used to generate outputs with 1 numbers. A solid enclosure of Tape & Reel (TR) surrounds pmic. A total of Transistor Driver dc switching's outputs can be handled by it. This dc control operates at 10V~55V and has a 10V~55V supply voltage. Suitable for working in an dc switcher that has a -40°C~85°C TA. Using this switching controller, it is possible to switch at Up to 1MHz. As it has a Surface Mount value, it can be used for general dc dc regulator. The dcdc regulator features Current Limit, Enable, Frequency Control, Soft Start for efficient switching control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. The switching converters's terminals (s) are designed at DUAL. Different dc switching's functions can be applied to 16 terminations. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 24V. Other relevant dc to dc converter ics will be returned if you search "TPS40061". Pins number 16 of switching converter in total. Statistically, the DC regulator outputs 45V voltage. You should note that the dc dc regulator's usual output current is 10A. This Surface Mount makes DC switcher suitable for most prototypes and applications. 1MHz is the maximum frequency of this dc regulators. When running the voltage regulator dc to dc in a circuit, users should apply 55V to ensure safety and reliability. Dormant dc switchings use 1.5mA.
TPS40061PWPRG4 Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
TPS40061PWPRG4 Applications
There are a lot of Texas Instruments TPS40061PWPRG4 DC to DC converter applications.
- Elevator lighting
- Program control systems
- Wide-range voltage regulation circuits
- Surface processing equipment
- Product testing
- Large fire protection systems
- Energy management systems
- seismic instrument power circuits
- Magnetohydrodynamic power
- Arc suppression circuits
