TPS40074RHLT

20 Terminals 4.5V~28V 20-Pin TPS40074 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs Up to 1MHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-TPS40074RHLT
Package: 20-VFQFN Exposed Pad
Datasheet: -
Stock: 323
Description: 20 Terminals 4.5V~28V 20-Pin TPS40074 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs Up to 1MHz Transistor Driver (Kg)

Details

Tags

Parameters
Mounting Type	Surface Mount
Package / Case	20-VFQFN Exposed Pad
Surface Mount	YES
Number of Pins	20
Weight	47.287005mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	20
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	TPS40074
Function	Step-Down
Number of Outputs	1
Qualification Status	Not Qualified
Output Voltage	23V
Output Type	Transistor Driver
Max Output Current	20A
Operating Supply Voltage	28V
Input Voltage-Nom	12V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	20A
Voltage - Supply (Vcc/Vdd)	4.5V~28V
Quiescent Current	1.5mA
Control Features	Current Limit, Enable, Frequency Control, Power Good, Soft Start
Max Output Voltage	23V
Topology	Buck
Min Input Voltage	4.5V
Control Mode	VOLTAGE-MODE
Frequency - Switching	Up to 1MHz
Max Input Voltage	28V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	Yes
Min Output Voltage	700mV
Switcher Configuration	PUSH-PULL
Max Frequency	1MHz
Duty Cycle (Max)	95%
Height	900μm
Length	4.5mm
Width	3.5mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TPS40074RHLT Overview

In the 20-VFQFN Exposed Pad package, the switching controller meets most application requirements. dc motor controller is suitable for 1 output generation. PMIC packaging is solid with a Tape & Reel (TR) enclosure. The system can process Transistor Driver dc switching's outputs (s). A 4.5V~28V voltage is supplied to the dc control and used for operating it. Work well in dc switchers with a -40°C~85°C TA. With this switching controller, you can switch at Up to 1MHz. A generalization of dc dc regulator can be made using Surface Mount. For efficient switching control, the dcdc regulator features Current Limit, Enable, Frequency Control, Power Good, Soft Start. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at QUAD. A variety of dc switching's functions can be performed on 20 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 12V is input. In addition to "TPS40074", there are other relevant dc to dc converter ics you can find. There are 20 pins on switching converter. Switching converter is a special type of Switching Regulator or Controllers. A 23V voltage of DC regulator was detected in the test statistics. You should note down the dc dc regulator's usual output current of 20A when you start a project. There is a maximum frequency of 1MHz on this dc regulators. To operate the voltage regulator dc to dc safely and reliably, users should apply 28V. During dormancy, the dc switching uses 1.5mA. In order to limit the voltage of a dc switcher whose maximum input voltage is 28V, it must be limited by the user. Voltage 4.5V is necessary for the supply. Input current cannot exceed 20A with this dc switcher. Datasheets state the switching converter can output up to 23V volts. 700mV voltage output is lower than 700mV.