TPS40077PWP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 62.709145mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 1MHz |
| Base Part Number | TPS40077 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 17V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~28V |
| Quiescent Current | 1.5mA |
| Control Features | Current Limit, Frequency Control, Power Good, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 1MHz |
| Input Voltage (Max) | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 93% |
| Clock Sync | No |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40077PWP Overview
Capsuled in the 16-PowerTSSOP (0.173, 4.40mm Width) package, the switching controller can be used for a wide range of applications. The dc motor controller is adquate to generate for 1 outputs. PMIC is packaged in a solid enclosure of Tube. It is capable of handling Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 4.5V~28V. Qualified to work in an dc switcher with -40°C~85°C TA. With this switching controller, you can switch at Up to 1MHz. The Surface Mount makes it ideal for general dc dc regulator. Current Limit, Frequency Control, Power Good, Soft Start provides dcdc regulator efficient switching control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at DUAL. A variety of 16 terminations are available in dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. 12V nominal DC switcher's voltage input. Other relevant dc to dc converter ics can be found by searching "TPS40077". There are only 16 pins on switching converter. Input voltage of dc dc voltage regulator should be 4.5V. DC regulator outputs 17V voltage based on test statistics. At most, the dc to dc regulator accepts 28V input voltage. If you start a project, note down the dc dc regulator's usual output current of 1A. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. 1MHz is the frequency of the switching controller. The dc switching utilizes 1.5mA when it is in a dormant state.
TPS40077PWP Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Current Limit, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
Frequency: 1MHz
TPS40077PWP Applications
There are a lot of Texas Instruments TPS40077PWP DC to DC converter applications.
- Computer rooms
- Geothermal power
- Elevator lighting
- CNC system
- Computer-related products
- Network technology
- Drilling machines
- Solar power plants
- Hydro power
- Current source circuits
