TPS40090RHDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-VFQFN Exposed Pad |
| Number of Pins | 28 |
| Weight | 71.610895mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | IT CAN ALSO OPERATE WITH CURRENT MODE |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | TPS40090 |
| Function | Step-Down |
| Number of Outputs | 4 |
| Output Voltage | 3.3V |
| Output Type | PWM Signal |
| Operating Supply Voltage | 15V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 120A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~15V |
| Quiescent Current | 4mA |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz~1.2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 1MHz |
| Duty Cycle (Max) | 87.5% |
| Clock Sync | Yes |
| Height | 1mm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40090RHDR Overview
In the 28-VFQFN Exposed Pad package, the switching controller meets most application requirements. For outputs of 4, this dc motor controller is suitable. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. PWM Signal dc switching's outputs (s) can be handled by it. A 4.5V~15V voltage is supplied to the dc control and used for operating it. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. In this switching controller, the switch can be set to 100kHz~1.2MHz. Surface Mount makes it suitable for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Current Limit, Enable, Frequency Control, Power Good, Soft Start. An analog IC SWITCHING CONTROLLER is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at QUAD. Different dc switching's functions can be applied to 28 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. The nominal DC switcher's voltage input is 12V. You can find other relevant dc to dc converter ics by searching "TPS40090". There are a total of 28 pins on switching converter. Statistically, the DC regulator outputs 3.3V voltage. The dc dc regulator's usual output current is 120A, which should be noted down when you start a project. The Surface Mount makes DC switcher suitable for most applications and prototypes. It is estimated that this dc regulatorhas a maximum frequency of 1MHz. For better satisfaction, the value of DC to DC voltage regulator is IT CAN ALSO OPERATE WITH CURRENT MODE. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 15V. DC switchings that are dormant use 4mA.
TPS40090RHDR Features
PWM Signal Outputs
Switching Frequency: 100kHz~1.2MHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
IT CAN ALSO OPERATE WITH CURRENT MODE
TPS40090RHDR Applications
There are a lot of Texas Instruments TPS40090RHDR DC to DC converter applications.
- Scientific research
- Direct power supply system
- Product burn-in
- Energy management systems
- Arc suppression circuits
- Electric water heaters
- Terrestrial set-top boxes
- Drilling machines
- Boring machines
- Digital video recorders
