TPS40091PWG4
| Parameters | |
|---|---|
| Package / Case | TSSOP |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | IT CAN ALSO OPERATE WITH CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Pin Count | 24 |
| Number of Outputs | 1 |
| Max Output Current | 120A |
| Operating Supply Voltage | 15V |
| Input Voltage-Nom | 12V |
| Temperature Grade | INDUSTRIAL |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Current - Output | 120A |
| Quiescent Current | 4mA |
| Frequency (Max) | 1MHz |
| Max Output Voltage | 3.3V |
| Voltage - Output | 3.3V |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1MHz |
| Max Input Voltage | 15V |
| Control Technique | PULSE WIDTH MODULATION |
| Min Output Voltage | 700mV |
| Switcher Configuration | PHASE-SHIFT |
| Duty Cycle (Max) | 87.5 % |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TPS40091PWG4 Overview
Capsuled in the TSSOP package, the switching controller can be used for a wide range of applications. For 1 outputs, the dc motor controller is appropriate. In this switching controller, the switch can be set to 1MHz. A SWITCHING CONTROLLER analog IC is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. A variety of dc switching's functions can be performed on 24 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. 12V nominal DC switcher's voltage input. In total, switching converter has 24 pins. Specifically, switching converter falls under the Switching Regulator or Controllers category. DC to DC voltage regulator has the value of IT CAN ALSO OPERATE WITH CURRENT MODE to better satisfy the requirement. Users should apply 15V to operate the voltage regulator dc to dc safely and reliably. A temperature of -40°C or higher is recommended. At85°C, dc regulator should run. The switch converters have 1 function (s) in total. DC switching uses 4mA when it is dormant. We are designing chips that have 24 pins. At maximum frequency, the controller can switch at 1MHz. The maximum input voltage of the dc switcher is 15V, so users need to limit the voltage accordingly. A 120A input switching controller would benefit from it. This process outputs a value of 3.3V for normalworking processes. 4.5V is the required supply voltage. DC switchers cannot produce output currents greater than 120A. Datasheets indicate that the switching converter can output 3.3V volts at its maximum. The voltage controller's lowest voltage output is not less than 700mV.
TPS40091PWG4 Features
Switching Frequency: 1MHz
PULSE WIDTH MODULATION
IT CAN ALSO OPERATE WITH CURRENT MODE
TPS40091PWG4 Applications
There are a lot of Texas Instruments TPS40091PWG4 DC to DC converter applications.
- Automatic testing equipment
- Automation technology
- Game consoles
- CNC system
- Sensitive electronic devices
- Computer-related products
- Energy management systems
- Motor controller circuits
- Grinders
- Bending machines
