TPS40091PWR

24 Terminals 4.5V~15V 24-Pin TPS40091 DC to DC converter ICSWITCHING CONTROLLER 4 Outputs 100kHz~1.2MHz PWM Signal

Manufacturer: Texas Instruments
Nocochips NO: 815-TPS40091PWR
Package: 24-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 628
Description: 24 Terminals 4.5V~15V 24-Pin TPS40091 DC to DC converter ICSWITCHING CONTROLLER 4 Outputs 100kHz~1.2MHz PWM Signal (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mounting Type	Surface Mount
Package / Case	24-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	24
Weight	89.499445mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	24
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature	IT CAN ALSO OPERATE WITH CURRENT MODE
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.65mm
Base Part Number	TPS40091
Function	Step-Down
Number of Outputs	4
Output Voltage	3.3V
Output Type	PWM Signal
Max Output Current	120A
Operating Supply Voltage	15V
Input Voltage-Nom	12V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	120A
Voltage - Supply (Vcc/Vdd)	4.5V~15V
Quiescent Current	4mA
Control Features	Current Limit, Enable, Frequency Control, Power Good, Soft Start
Max Output Voltage	3.3V
Topology	Buck
Min Input Voltage	4.5V
Control Mode	CURRENT-MODE
Frequency - Switching	100kHz~1.2MHz
Max Input Voltage	15V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	No
Min Output Voltage	700mV
Switcher Configuration	PHASE-SHIFT
Max Frequency	1MHz
Duty Cycle (Max)	87.5%
Clock Sync	Yes
Height	1.2mm
Length	7.8mm
Width	4.4mm
Thickness	1mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TPS40091PWR Overview

It comes in the 24-TSSOP (0.173, 4.40mm Width) package, which makes switching controller suitable for most applications. There is enough capacity in the dc motor controller to generate the output for the 4 input. An enclosure of Tape & Reel (TR) is used to package the PMIC. PWM Signal dc switching's outputs (s) can be handled by it. 4.5V~15V is the operating voltage and supply voltage of the dc control. Worked in an dc switcher with a -40°C~85°C TA rating. The switching controller can be switched at 100kHz~1.2MHz. Surface Mount makes it suitable for general dc dc regulator. Switching control is made easier with the dcdc regulator's Current Limit, Enable, Frequency Control, Power Good, Soft Start. SWITCHING CONTROLLER analog IC connects the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. 24 terminations with a variety of function. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. 12V nominal DC switcher's voltage input. Searching "TPS40091" will return other relevant dc to dc converter ics. There are 24 pins on switching converter. The test statistics indicate that DC regulator outputs a voltage of 3.3V. normally, the dc dc regulator's output current is 120A, which you should keep in mind when starting a project. DC regulators have a maximum frequency of 1MHz. In order to satisfy the need, DC to DC voltage regulator has a value of IT CAN ALSO OPERATE WITH CURRENT MODE. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 15V. In dormant mode, 4mA is used. The maximum input voltage of this dc switcher is 15V, so users must limit the voltage accordingly. 4.5V is the required supply voltage. An output current greater than 120A cannot be provided by the dc switcher. Datasheets indicate that the switching converter can output 3.3V volts at its maximum. Its lowest voltage output is not less than 700mV.

TPS40091PWR Features

PWM Signal Outputs
Switching Frequency: 100kHz~1.2MHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
IT CAN ALSO OPERATE WITH CURRENT MODE