TPS40100RGET
| Parameters | |
|---|---|
| Duty Cycle | 85 % |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 880μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 45.387587mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Frequency | 600kHz |
| Base Part Number | TPS40100 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Max Output Current | 20A |
| Operating Supply Voltage | 18V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~18V |
| Quiescent Current | 1.8mA |
| Control Features | Current Limit, Frequency Control, Power Good, Soft Start, Tracking |
| Max Output Voltage | 5.5V |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz~600kHz |
| Max Input Voltage | 18V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 700mV |
| Switcher Configuration | PUSH-PULL |
TPS40100RGET Overview
Capsuled in the 24-VFQFN Exposed Pad package, the switching controller can be used for a wide range of applications. It is sufficient to generate 1 outputs with this dc motor controller. Tape & Reel (TR) solid enclosure protects the pmic. A total of Transistor Driver dc switching's outputs can be handled by it. The supply and operating voltage of the dc control are 4.5V~18V. Work well in dc switchers with a -40°C~85°C TA. The switching controller can be switched at 100kHz~600kHz. Surface Mount makes it suitable for general dc dc regulator. Current Limit, Frequency Control, Power Good, Soft Start, Tracking provides dcdc regulator efficient switching control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. The switching converters's terminal (s) are designed at QUAD . A variety of dc switching's functions can be performed on 24 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input of 12V. TPS40100 can be used to locate other relevant dc to dc converter ics. Pins number 24 of switching converter in total. There is a particular type of Switching Regulator or Controllers in switching converter. The test statistics indicate that DC regulator outputs a voltage of 5.5V. In most cases, the output current of the dc dc regulator will be 20A, so note that when you start the project. 600kHz is the frequency of the switching controller. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 18V. Dormant dc switchings use 1.8mA. In order to ensure the dc switcher's functionality, users must limit the voltage to 18V due to the dc switcher's maximum input voltage. Voltage 12V is required for supply. Voltage 4.5V must be supplied. The dc switcher will not provide an output current greater than 20A. A datasheet states that the switching converter can output 5.5V volts at its maximum. At least 700mV voltage is output by the voltage controller.
TPS40100RGET Features
Transistor Driver Outputs
Switching Frequency: 100kHz~600kHz
Current Limit, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
Frequency: 600kHz
TPS40100RGET Applications
There are a lot of Texas Instruments TPS40100RGET DC to DC converter applications.
- Laboratories
- Terrestrial set-top boxes
- Solar power plants
- Adjustable voltage or current linear circuits
- Servo drive system
- Scientific testing
- Digital video recorders
- Packaging
- Scientific research
- Computer monitoring equipment of building
