TPS40101RGER

24 Terminals 4.5V~18V 24-Pin TPS40101 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 100kHz~1MHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-TPS40101RGER
Package: 24-VFQFN Exposed Pad
Datasheet: -
Stock: 263
Description: 24 Terminals 4.5V~18V 24-Pin TPS40101 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 100kHz~1MHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mounting Type	Surface Mount
Package / Case	24-VFQFN Exposed Pad
Surface Mount	YES
Number of Pins	24
Weight	45.387587mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	24
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	TPS40101
Function	Step-Down
Number of Outputs	1
Qualification Status	Not Qualified
Output Voltage	5.5V
Output Type	Transistor Driver
Max Output Current	20A
Operating Supply Voltage	18V
Input Voltage-Nom	12V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	20A
Voltage - Supply (Vcc/Vdd)	4.5V~18V
Quiescent Current	1.8mA
Control Features	Current Limit, Frequency Control, Power Good, Soft Start, Tracking
Max Output Voltage	5.5V
Topology	Buck
Min Input Voltage	4.5V
Control Mode	VOLTAGE-MODE
Frequency - Switching	100kHz~1MHz
Max Input Voltage	18V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	Yes
Min Output Voltage	690mV
Switcher Configuration	PUSH-PULL
Max Frequency	1MHz
Duty Cycle	85 %
Height	1mm
Length	4mm
Width	4mm
Thickness	880μm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

TPS40101RGER Overview

This switching controller fits most application requirements since it is packaged in a 24-VFQFN Exposed Pad package. There is enough capacity in the dc motor controller to generate the output for the 1 input. A solid enclosure of Tape & Reel (TR) surrounds pmic. With Transistor Driver dc switching's output (s), it is able to handle it. Voltages 4.5V~18V are the dc control's supply voltage and operating voltage, respectively. Suitable for work in a -40°C~85°C TA dc switcher. It can switch at 100kHz~1MHz. It is suitable for general dc dc regulator when it is set to Surface Mount. Featured in the dcdc regulator is Current Limit, Frequency Control, Power Good, Soft Start, Tracking which allows efficient switching control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. Switching converters are designed with the terminal (s) at position QUAD . A variety of 24 terminations are available in dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. 12V nominal DC switcher's voltage input. A search for "TPS40101" will reveal other relevant dc to dc converter ics. There are only 24 pins on switching converter. According to the test statistics, DC regulator outputs 5.5V voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 20A. DC regulator1MHz has the maximum frequency. To run the voltage regulator dc to dc safely and reliably, users should apply 18V to the voltage regulator dc to dc. In dormant mode, 1.8mA is used. Because the dc switcher's maximum input voltage is 18V users must limit the voltage accordingly. A voltage of 4.5V must be present in the supply. The dc switcher will not provide an output current greater than 20A. As per its datasheet, the switching converter has a maximum output of 5.5V volts. voltage controllers with a minimum voltage output of 690mV cannot operate.