TPS40101RGET

24 Terminals 4.5V~18V 24-Pin TPS40101 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 100kHz~1MHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-TPS40101RGET
Package: 24-VFQFN Exposed Pad
Datasheet: PDF
Stock: 579
Description: 24 Terminals 4.5V~18V 24-Pin TPS40101 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 100kHz~1MHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 6 days ago)
Mounting Type	Surface Mount
Package / Case	24-VFQFN Exposed Pad
Surface Mount	YES
Number of Pins	24
Weight	45.387587mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	24
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	TPS40101
Function	Step-Down
Number of Outputs	1
Qualification Status	Not Qualified
Output Voltage	5.5V
Output Type	Transistor Driver
Max Output Current	20A
Operating Supply Voltage	18V
Input Voltage-Nom	12V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	20A
Voltage - Supply (Vcc/Vdd)	4.5V~18V
Quiescent Current	1.8mA
Control Features	Current Limit, Frequency Control, Power Good, Soft Start, Tracking
Max Output Voltage	5.5V
Topology	Buck
Min Input Voltage	4.5V
Control Mode	VOLTAGE-MODE
Frequency - Switching	100kHz~1MHz
Max Input Voltage	18V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	Yes
Min Output Voltage	690mV
Switcher Configuration	PUSH-PULL
Max Frequency	1MHz
Duty Cycle	85 %
Height	1mm
Length	4mm
Width	4mm
Thickness	880μm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

TPS40101RGET Overview

It comes in the 24-VFQFN Exposed Pad package, which makes switching controller suitable for most applications. It is sufficient to generate 1 outputs with this dc motor controller. PMIC is packaged in a solid enclosure of Tape & Reel (TR). Transistor Driver dc switching's outputs (s) are supported. 4.5V~18V is the supply voltage and the operating voltage of the dc control. Suitable for a -40°C~85°C TA dc switcher. A switching controller such as this can switch at a value of 100kHz~1MHz . As it has a Surface Mount value, it can be used for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Current Limit, Frequency Control, Power Good, Soft Start, Tracking. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. There are a terminal (s) on the switching converters that are designed at QUAD. Various 24 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's input voltageis 12V volts. Other relevant dc to dc converter ics will be returned if you search "TPS40101". Pins number 24 of switching converter in total. A 5.5V voltage of DC regulator was detected in the test statistics. In most cases, the output current of the dc dc regulator will be 20A, so note that when you start the project. DC regulators have a maximum frequency of 1MHz. It is suggested that users apply 18V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. A dc switching in a dormant state uses 1.8mA. In order to limit the voltage of a dc switcher whose maximum input voltage is 18V, it must be limited by the user. A voltage of 4.5V is required for the supply. The dc switcher will not provide an output current greater than 20A. At its maximum, the switching converter can output 5.5V volts. Lowest voltage output of the voltage controller must be greater than 690mV.