TPS40130DBT
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 30-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 30 |
| Weight | 97.49401mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 30 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS40130 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 4V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 40V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 50A |
| Voltage - Supply (Vcc/Vdd) | 3V~40V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz~1.2MHz |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 1.2MHz |
| Duty Cycle (Max) | 87.5% |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40130DBT Overview
It comes in a 30-TFSOP (0.173, 4.40mm Width) package, so switching controller can be used for most applications. The dc motor controller is adquate to generate for 2 outputs. Tube is the solid enclosure in which PMIC is packaged. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThis dc control has a supply voltage and operating voltage of 3V~40V. Worked in an dc switcher with a -40°C~85°C TA rating. Switching can be done at 100kHz~1.2MHz with this switching controller. dc dc regulators can be carried out with Surface Mount. In order to control switching efficiently, the dcdc regulator features Current Limit, Enable, Frequency Control, Power Good, Soft Start. An analog IC SWITCHING CONTROLLER is connected to the switch converters. There are a DUAL terminal on the switching converters. An array of 30 terminations of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 5V is input. TPS40130 can be searched for other relevant dc to dc converter ics. There are only 30 pins on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. 4.5V should be the minimum input voltage for the dc dc voltage regulator. According to the test statistics, DC regulator outputs 4V voltage. The dc to dc regulator can only accept 5.5V input voltage. normally, the dc dc regulator's output current is 50A, which you should keep in mind when starting a project. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. 1.2MHz is the maximum frequency of this dc regulators. It is suggested that users apply 40V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit.
TPS40130DBT Features
Transistor Driver Outputs
Switching Frequency: 100kHz~1.2MHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
TPS40130DBT Applications
There are a lot of Texas Instruments TPS40130DBT DC to DC converter applications.
- Elevator lighting
- Thermal power
- Remotely powered electric motors
- Computer-related products
- Medical equipment
- ATMs
- Correction machines
- Power supplies of electronic gadgets
- Driver circuits
- SMT equipment
