TPS40130RHBRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Number of Pins | 32 |
| Weight | 71.809342mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS40130 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Voltage | 6V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 40V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 50A |
| Voltage - Supply (Vcc/Vdd) | 3V~40V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz~1.2MHz |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 1.2MHz |
| Duty Cycle (Max) | 87.5% |
| Height Seated (Max) | 1mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40130RHBRG4 Overview
It comes in a 32-VFQFN Exposed Pad package, so switching controller can be used for most applications. 2 outputs can be generated with the dc motor controller. There is a Tape & Reel (TR) solid enclosure around the pmic. The program can handle Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 3V~40V. Suitable for a -40°C~85°C TA dc switcher. In this switching controller, the switch can be set to 100kHz~1.2MHz. dc dc regulator can be generalized using Surface Mount. DCDC regulator is controlled efficiently by Current Limit, Enable, Frequency Control, Power Good, Soft Start. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. There are a QUAD terminal on the switching converters. A variety of terminations with 32 of dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 5V. TPS40130 can be used to locate other relevant dc to dc converter ics. 32 pins are on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. The minimum input voltage of the dc dc voltage regulator should be 4.5V. As determined by the test statistics, the output voltage of DC regulator is 6V. A maximum voltage of 5.5V is accepted by the dc to dc regulator as an input voltage. You should note that the dc dc regulator's usual output current is 50A. The Surface Mount makes DC switcher suitable for most applications and prototypes. DC regulator has a maximum frequency of 1.2MHz. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 40V.
TPS40130RHBRG4 Features
Transistor Driver Outputs
Switching Frequency: 100kHz~1.2MHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
TPS40130RHBRG4 Applications
There are a lot of Texas Instruments TPS40130RHBRG4 DC to DC converter applications.
- Various precision measuring instruments
- Constant current circuits
- Automatic plug-in machines
- Digital video recorders
- Serial communication converter
- Hydraulic presses
- Various precision measuring detectors
- Bending machines
- Smoke prevention equipment
- Electrical distribution systems
