TPS40132RHBR
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 71.809342mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES AS LDO REGULATOR |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS40132 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Voltage | 5.8V |
| Output Type | Transistor Driver |
| Max Output Current | 40A |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 40A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~28V |
| Quiescent Current | 1mA |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start |
| Max Output Voltage | 5.8V |
| Topology | Buck |
| Min Input Voltage | 1V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz~1.2MHz |
| Max Input Voltage | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 600mV |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 1.2MHz |
| Max Duty Cycle | 87.5 % |
| Height | 1mm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40132RHBR Overview
It comes in a 32-VFQFN Exposed Pad package, so switching controller can be used for most applications. It is sufficient to generate 2 outputs with this dc motor controller. There is a Tape & Reel (TR) solid enclosure around the pmic. There are Transistor Driver dc switching's output (s) that it can handle. DC control operates at 4.5V~28V volts and has 4.5V~28V supply voltage. A -40°C~85°C TA dc switcher is not a problem. With this switching controller, you can switch at 100kHz~1.2MHz. Surface Mount makes it suitable for general dc dc regulator. Current Limit, Enable, Frequency Control, Power Good, Soft Start is used for efficient switching control in the dcdc regulator. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. A switching converters's terminal (s) sits at the QUAD position. 32 terminations with various dc switching's functions. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis 5V volts. Search for "TPS40132" to find other relevant dc to dc converter ics. The switching converter has a total of 32 pins. Particularly, switching converter is a type of Switching Regulator or Controllers. A 5.8V voltage of DC regulator was detected in the test statistics. normally, the dc dc regulator's output current is 40A, which you should keep in mind when starting a project. The maximum duty cycle of this voltage regulator dc to dc is set to 87.5 % to ensure reliability during power-up and power-down. The max frequency of the pmic can reach 1.2MHz. Hence, ALSO OPERATES AS LDO REGULATOR is used to better suit the DC to DC voltage regulator's situation. In a dormant state, the dc switching uses 1mA. The maximum input voltage of this dc switcher is 40V, so users must limit the voltage accordingly. Voltage 1V must be supplied. In this case, the dc switcher won't produce more than 40A watts of output current. The switching converter can output 5.8V volts at its utmost, according to the datasheet. Lowest voltage output of the voltage controller must be greater than 600mV.
TPS40132RHBR Features
Transistor Driver Outputs
Switching Frequency: 100kHz~1.2MHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 87.5 %
ALSO OPERATES AS LDO REGULATOR
TPS40132RHBR Applications
There are a lot of Texas Instruments TPS40132RHBR DC to DC converter applications.
- Window air conditioners
- CMM
- Sink circuits
- Packaging
- Combined machine tools
- Refrigerators of central air conditioners
- Remotely powered electric motors
- Various CNC machine tools
- Electric heating, lighting
- Solar power plants
