TPS40140RHHRG4
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 36-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 36 |
| Weight | 105.687022mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES IN CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS40140 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5.8V |
| Output Type | Transistor Driver |
| Max Output Current | 25A |
| Operating Supply Voltage | 15V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~15V |
| Quiescent Current | 2.8mA |
| Control Features | Current Limit, Frequency Control, Phase Control, Power Good, Tracking |
| Max Output Voltage | 5.8V |
| Topology | Buck |
| Min Input Voltage | 2V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 150kHz~1MHz |
| Max Input Voltage | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 700mV |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 1MHz |
| Duty Cycle (Max) | 87.5% |
| Clock Sync | No |
| Height | 1mm |
| Length | 6mm |
| Width | 6mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40140RHHRG4 Overview
Capsuled in the 36-VFQFN Exposed Pad package, the switching controller suits most application needs. There is enough capacity in the dc motor controller to generate the output for the 2 input. Tape & Reel (TR) solid enclosure protects the pmic. The system can process Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 4.5V~15V. Qualified to work in an dc switcher with -40°C~85°C TA. Using this switching controller, it is possible to switch at 150kHz~1MHz. The Surface Mount makes it ideal for general dc dc regulator. For efficient switching control, the dcdc regulator features Current Limit, Frequency Control, Phase Control, Power Good, Tracking. An analog IC DUAL SWITCHING CONTROLLER is connected to the switch converters. Thare switching converters has a terminal (s) at QUAD . Various 36 terminations. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input is 12V. You can find other relevant dc to dc converter ics by searching "TPS40140". The switching converter has a total of 36 pins. Switching converter is a special type of Switching Regulator or Controllers. Statistically, the DC regulator outputs 5.8V voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 25A. DC regulator1MHz has the maximum frequency. DC to DC voltage regulator has a value of ALSO OPERATES IN CURRENT MODE to better satisfy the need. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 15V. In a dormant state, the dc switching uses 2.8mA. Users must limit the voltage accordingly because the dc switcher's maximum input voltage is 40V. There must be a 2V supply voltage. The dc switcher will not provide an output current greater than 25A. At its maximum, the switching converter can output 5.8V volts. 700mV voltage output is lower than 700mV.
TPS40140RHHRG4 Features
Transistor Driver Outputs
Switching Frequency: 150kHz~1MHz
Current Limit, Frequency Control, Phase Control, Power Good, Tracking
PULSE WIDTH MODULATION
ALSO OPERATES IN CURRENT MODE
TPS40140RHHRG4 Applications
There are a lot of Texas Instruments TPS40140RHHRG4 DC to DC converter applications.
- Wind power
- Drilling machines
- ATMs
- Smoke prevention equipment
- Television equipment
- Driver circuits
- Product burn-in
- Machining centers
- Scientific testing
- Bending machines
