TPS40180RGER
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 45.387587mg |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 5.8V |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS40180 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.8V |
| Output Type | Transistor Driver |
| Max Output Current | 25A |
| Operating Supply Voltage | 40V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~15V |
| Control Features | Current Limit, Frequency Control, Phase Control, Power Good, Soft Start |
| Max Output Voltage | 5.8V |
| Topology | Buck |
| Min Input Voltage | 2V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 150kHz~1MHz |
| Max Input Voltage | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 700mV |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Duty Cycle (Max) | 87.5% |
| Clock Sync | No |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 880μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40180RGER Overview
As a result of 24-VFQFN Exposed Pad compact design, the switching controller is compatible with most applications. For outputs of 1, this dc motor controller is suitable. An enclosure of Tape & Reel (TR) is used to package the PMIC. The program can handle Transistor Driver dc switching's outputs (s). DC control operates at 4.5V~15V volts and has 4.5V~15V supply voltage. Suitable for work in a -40°C~105°C TA dc switcher. The switching controller is capable of switching at the 150kHz~1MHz position. The Surface Mount allows it to be used for dc dc regulator in general. To ensure efficient switching, this dcdc regulator features a Current Limit, Frequency Control, Phase Control, Power Good, Soft Start. A SWITCHING CONTROLLER analog IC is connected to the switch converters. The switching converters's terminal (s) are designed at QUAD . An array of 24 terminations of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. It is inputted with a DC switcher's voltage of 12V. Other relevant dc to dc converter ics will be returned if you search "TPS40180". 24 pins are on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. The test statistics indicate that DC regulator outputs a voltage of 5.8V. A starting point for a project is to note down the dc dc regulator's usual output current, which is 25A. DC regulator has a maximum frequency of 1MHz. As a result, DC to DC voltage regulator has a value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 5.8V so that the need can be met more directly. To run the voltage regulator dc to dc safely and reliably, users should apply 40V to the voltage regulator dc to dc. The dc switcher's maximum input voltage is 40V; users must limit it accordingly. Voltage 2V is needed for the supply. Output current will not exceed 25A. As per its datasheet, the switching converter has a maximum output of 5.8V volts. Its lowest voltage output is not less than 700mV.
TPS40180RGER Features
Transistor Driver Outputs
Switching Frequency: 150kHz~1MHz
Current Limit, Frequency Control, Phase Control, Power Good, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 5.8V
TPS40180RGER Applications
There are a lot of Texas Instruments TPS40180RGER DC to DC converter applications.
- Overvoltage protection circuits in TV sets
- Game consoles
- Flexible manufacturing cells
- Nuclear power plants
- Industrial controllers
- Post equipment
- seismic instrument power circuits
- Direct power supply system
- Electrical distribution systems
- Serial communication converter
