TPS40190DRCR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 26.109911mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS40190 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 12.75V |
| Output Type | Transistor Driver |
| Max Output Current | 20A |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~15V |
| Quiescent Current | 2.5mA |
| Control Features | Enable |
| Max Output Voltage | 12.75V |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 300kHz |
| Max Input Voltage | 15V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Dropout Voltage | 270mV |
| Min Output Voltage | 600mV |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 360kHz |
| Duty Cycle (Max) | 85% |
| Clock Sync | No |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40190DRCR Overview
As a result of 10-VFDFN Exposed Pad compact design, the switching controller is compatible with most applications. 1 outputs can be generated with the dc motor controller. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. Transistor Driver dc switching's outputs (s) are supported. 4.5V~15V is the operating voltage and supply voltage of the dc control. Work well in dc switchers with a -40°C~85°C TA. It can switch at 300kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. In order to control switching efficiently, the dcdc regulator features Enable. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . An array of 10 terminations of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. 12V nominal DC switcher's voltage input. A search for "TPS40190" will reveal other relevant dc to dc converter ics. There are only 10 pins on switching converter. A 12.75V voltage of DC regulator was detected in the test statistics. You should note down the dc dc regulator's usual output current of 20A when you start a project. It is estimated that this dc regulatorhas a maximum frequency of 360kHz. As long as the dc switching is in a dormant state, it utilizes 2.5mA. The maximum input voltage of this dc switcher is 15V, so users must limit the voltage accordingly. Voltage 4.5V is necessary for the supply. Input current cannot exceed 20A with this dc switcher. As per its datasheet, the switching converter has a maximum output of 12.75V volts. voltage controllers with a minimum voltage output of 600mV cannot operate.
TPS40190DRCR Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Enable
PULSE WIDTH MODULATION
TPS40190DRCR Applications
There are a lot of Texas Instruments TPS40190DRCR DC to DC converter applications.
- Product burn-in
- Various precision measuring instruments
- Post equipment
- Domestic water pumps
- Medical monitoring systems
- Series voltage regulation circuits
- Special machining machine tools
- Bending machines
- Industrial robots
- Gear/thread machining machines
