TPS40190DRCTG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 26.109911mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS40190 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 12.75V |
| Output Type | Transistor Driver |
| Max Output Current | 20A |
| Operating Supply Voltage | 15V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~15V |
| Quiescent Current | 2.5mA |
| Control Features | Enable |
| Max Output Voltage | 12.75V |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 300kHz |
| Max Input Voltage | 15V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 600mV |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 360kHz |
| Duty Cycle (Max) | 85% |
| Clock Sync | No |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40190DRCTG4 Overview
With its 10-VFDFN Exposed Pad package, the switching controller fits the needs of most applications. dc motor controller is suitable for 1 output generation. PMIC packaging is solid with a Tape & Reel (TR) enclosure. Transistor Driver dc switching's outputs (s) are supported. This dc control has a supply voltage and operating voltage of 4.5V~15V. Suitable for working in an dc switcher that has a -40°C~85°C TA. It can switch at 300kHz. dc dc regulator is made easier with Surface Mount. Featured in the dcdc regulator is Enable which allows efficient switching control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. Various 10 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input of 12V. A search for "TPS40190" will reveal other relevant dc to dc converter ics. The switching converter has a total of 10 pins. The test statistics indicate that DC regulator outputs a voltage of 12.75V. You should note that the dc dc regulator's usual output current is 20A. DC regulators have a maximum frequency of 360kHz. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 15V. DC switchings that are dormant use 2.5mA. In order to ensure the dc switcher's functionality, users must limit the voltage to 15V due to the dc switcher's maximum input voltage. The supply voltage must be 4.5V. In this case, the dc switcher won't produce more than 20A watts of output current. The datasheet indicates that the switching converter can output 12.75V volts at its maximum. At least 600mV voltage is output by the voltage controller.
TPS40190DRCTG4 Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Enable
PULSE WIDTH MODULATION
TPS40190DRCTG4 Applications
There are a lot of Texas Instruments TPS40190DRCTG4 DC to DC converter applications.
- Motor controller circuits
- Printing equipment
- Digital precision reference circuits
- CNC system
- Smart grid
- Electrical power transmission
- Overvoltage protection circuits in TV sets
- Telecommunications equipment
- Series voltage regulation circuits
- Serial communication converter
