TPS40192DRCR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 26.109911mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS40192 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 14.4V |
| Output Type | Transistor Driver |
| Max Output Current | 15A |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 15A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~18V |
| Quiescent Current | 2.5mA |
| Control Features | Enable, Power Good |
| Max Output Voltage | 14.4V |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 600kHz |
| Max Input Voltage | 18V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 591mV |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 700kHz |
| Duty Cycle (Max) | 85% |
| Clock Sync | No |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40192DRCR Overview
Capsuled in the 10-VFDFN Exposed Pad package, the switching controller can be used for a wide range of applications. For outputs of 1, this dc motor controller is suitable. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. A total of Transistor Driver dc switching's outputs can be handled by it. dc control's supply and operating voltages are 4.5V~18V. A -40°C~85°C TA dc switcher is not a problem. It can switch at 600kHz. dc dc regulator can be generalized using Surface Mount. The dcdc regulator features Enable, Power Good for efficient switching control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . An array of 10 terminations of dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's input voltageis set to 12V. You can find other relevant dc to dc converter ics by searching "TPS40192". Total pins of switching converter are 10. Test statistics indicate DC regulator outputs 14.4V voltage. The dc dc regulator's usual output current is 15A, which should be noted down when you start a project. 700kHz is the maximum frequency of this dc regulators. In a dormant state, the dc switching uses 2.5mA. The maximum input voltage of this dc switcher is 18V, so users must limit the voltage accordingly. A voltage of 4.5V is required for the supply. DC switcher will not be able to provide an output current above 15A volts. At its maximum, the switching converter can output 14.4V volts. Its lowest voltage output is not less than 591mV.
TPS40192DRCR Features
Transistor Driver Outputs
Switching Frequency: 600kHz
Enable, Power Good
PULSE WIDTH MODULATION
TPS40192DRCR Applications
There are a lot of Texas Instruments TPS40192DRCR DC to DC converter applications.
- Photovoltaic power
- Fire elevators
- Elevator lighting
- Sensitive electronic devices
- Electric water heaters
- Digital video recorders
- Automatic testing equipment
- Automation technology
- Geothermal power
- Precision electronic equipment
