TPS40192DRCRG4
| Parameters | |
|---|---|
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 26.109911mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Pin Count | 10 |
| Max Output Current | 15A |
| Operating Supply Voltage | 18V |
| Input Voltage-Nom | 12V |
| Temperature Grade | INDUSTRIAL |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Current - Output | 15A |
| Quiescent Current | 2.5mA |
| Frequency (Max) | 700kHz |
| Max Output Voltage | 14.4V |
| Voltage - Output | 14.4V |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 600kHz |
| Max Input Voltage | 18V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 591mV |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 85 % |
| Duty Cycle (Max) | 85 % |
| Clock Sync | No |
| Number of Output Phases | 1 |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
TPS40192DRCRG4 Overview
Tape & Reel (TR) solid enclosure protects the pmic. A switching controller such as this can switch at a value of 600kHz . SWITCHING CONTROLLER analog IC connects the switch converters. Switching converters are designed with the terminal (s) at position DUAL . The 10 terminations can be used for a wide range of dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 12V. There are 10 pins on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. voltage regulator dc to dcs with a 85 % duty cycle are designed to be reliable when powered on and powered off. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 18V. Ideally, dc regulator should be kept at a temperature of -40°C or higher. There should be 125°C temperature above 125°C degrees Celsius when dc regulator runs. The switch converters have 1 function (s) in total. In dormant mode, 2.5mA is used. The dc switching comes with 10 pins set. There is a maximum frequency of 700kHz that the controller can switch at. The maximum input voltage of dc switcher is 18V, so users should limit their voltage accordingly. Inputs of 15A are ideal for this component. It outputs a voltage of 14.4V when working normally. Voltage 4.5V is necessary for the supply. Input current cannot exceed 15A with this dc switcher. As per its datasheet, the switching converter has a maximum output of 14.4V volts. voltage controllers with a minimum voltage output of 591mV cannot operate. This controller contains 1 phases.
TPS40192DRCRG4 Features
Switching Frequency: 600kHz
PULSE WIDTH MODULATION
Max Duty Cycle: 85 %
TPS40192DRCRG4 Applications
There are a lot of Texas Instruments TPS40192DRCRG4 DC to DC converter applications.
- Various CNC machine tools
- Hydrogen power
- Program control systems
- SMT equipment
- seismic instrument power circuits
- Electric water heaters
- Experimental setup
- Driver circuits
- Wind power
- Product burn-in
