TPS40192DRCT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 26.109911mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Frequency | 600kHz |
| Base Part Number | TPS40192 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 14.4V |
| Output Type | Transistor Driver |
| Max Output Current | 15A |
| Operating Supply Voltage | 18V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~18V |
| Quiescent Current | 2.5mA |
| Control Features | Enable, Power Good |
| Max Output Voltage | 14.4V |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 18V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 591mV |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 85% |
| Clock Sync | No |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40192DRCT Overview
The switching controller fits in the 10-VFDFN Exposed Pad package and is ideal for most applications. For outputs of 1, this dc motor controller is suitable. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. Transistor Driver dc switching's outputs (s) are supported. A 4.5V~18V voltage is supplied to the dc control and used for operating it. Qualified to work in an dc switcher with -40°C~85°C TA. A generalization of dc dc regulator can be made using Surface Mount. Enable, Power Good provides dcdc regulator efficient switching control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. The switching converters's terminal (s) are designed at DUAL . 10 terminations with a variety of function. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. A DC switcher's nominal voltage of 12V is input. Searching "TPS40192" will return other relevant dc to dc converter ics. 10 pins are on switching converter. Statistically, the DC regulator outputs 14.4V voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 20A. 600kHz is the frequency of the switching controller. To operate the voltage regulator dc to dc safely and reliably, users should apply 18V. When the dc switching is dormant, it uses 2.5mA. Because the dc switcher's maximum input voltage is 18V users must limit the voltage accordingly. 4.5V is the required supply voltage. In this case, the dc switcher won't produce more than 15A watts of output current. At its maximum, the switching converter can output 14.4V volts. voltage controllers with a minimum voltage output of 591mV cannot operate.
TPS40192DRCT Features
Transistor Driver Outputs
Enable, Power Good
PULSE WIDTH MODULATION
Frequency: 600kHz
TPS40192DRCT Applications
There are a lot of Texas Instruments TPS40192DRCT DC to DC converter applications.
- Surge protection circuits
- Flaw detection equipment
- Computer application technology
- Elevator lighting
- Printing equipment
- Hydraulic presses
- Wide-range voltage regulation circuits
- seismic instrument power circuits
- Industrial controllers
- Laboratories
