TPS40193DRCR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 26.109911mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS40193 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 14.4V |
| Output Type | Transistor Driver |
| Max Output Current | 20A |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~18V |
| Quiescent Current | 2.5mA |
| Control Features | Enable, Power Good |
| Max Output Voltage | 14.4V |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 300kHz |
| Max Input Voltage | 18V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 591mV |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 360kHz |
| Duty Cycle (Max) | 85% |
| Clock Sync | No |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40193DRCR Overview
As a result of 10-VFDFN Exposed Pad compact design, the switching controller is compatible with most applications. For outputs of 1, this dc motor controller is suitable. The pmic is packaged in Tape & Reel (TR) solid enclosure. With this function, you can deal with Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 4.5V~18V. Worked in a -40°C~85°C TA dc switcher before. This switching controller can switch at 300kHz. The Surface Mount makes it ideal for general dc dc regulator. Enable, Power Good provides dcdc regulator efficient switching control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. Various 10 terminations. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 12V. Searching "TPS40193" will return other relevant dc to dc converter ics. Pins number 10 of switching converter in total. According to the test statistics, DC regulator outputs 14.4V voltage. In most cases, the output current of the dc dc regulator will be 20A, so note that when you start the project. The max frequency of the pmic can reach 360kHz. In dormant mode, 2.5mA is used. The maximum input voltage of the dc switcher is 18V, so users need to limit the voltage accordingly. A voltage of 4.5V must be present in the supply. The dc switcher will not provide an output current greater than 20A. The datasheet indicates that the switching converter can output 14.4V volts at its maximum. Neither the voltage controller's lowest voltage output 591mVr its highest voltage output is less than 591mV.
TPS40193DRCR Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Enable, Power Good
PULSE WIDTH MODULATION
TPS40193DRCR Applications
There are a lot of Texas Instruments TPS40193DRCR DC to DC converter applications.
- Radio equipment
- Packaging
- Surface processing equipment
- Machining centers
- PSRR circuits
- Telecommunications equipment
- Pipe bending machines
- Electric heating, lighting
- Plate bending machines
- Direct power supply system
