TPS40193DRCRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 26.109911mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS40193 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 14.4V |
| Output Type | Transistor Driver |
| Max Output Current | 20A |
| Operating Supply Voltage | 18V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~18V |
| Quiescent Current | 2.5mA |
| Control Features | Enable, Power Good |
| Max Output Voltage | 14.4V |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 300kHz |
| Max Input Voltage | 18V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 591mV |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 360kHz |
| Duty Cycle (Max) | 85% |
| Clock Sync | No |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40193DRCRG4 Overview
The switching controller fits in the 10-VFDFN Exposed Pad package and is ideal for most applications. There is sufficient capacity to generate switching controller for outputs 1. PMIC is packaged in a solid enclosure of Tape & Reel (TR). A total of Transistor Driver dc switching's outputs can be handled by it. 4.5V~18V is the operating voltage and supply voltage of the dc control. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. This switching controller can switch at 300kHz. The Surface Mount allows it to be used for dc dc regulator in general. To ensure efficient switching, this dcdc regulator features a Enable, Power Good. The switch converters are connected to a SWITCHING CONTROLLER analog IC. The switching converters's terminals (s) are designed at DUAL. The 10 terminations can be used for a wide range of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. There is a DC switcher's nominal voltage of 12V. In addition to "TPS40193", there are other relevant dc to dc converter ics you can find. There are a total of 10 pins on switching converter. The test statistics indicate that DC regulator outputs a voltage of 14.4V. It's important to remember that the dc dc regulator's normaloutput current is 20A, so you should note it down when starting a new project. DC regulator360kHz has the maximum frequency. To operate the voltage regulator dc to dc safely and reliably, users should apply 18V. In dormant mode, 2.5mA is used. Users must limit the voltage accordingly because the dc switcher's maximum input voltage is 18V. Voltage 4.5V is needed for the supply. A dc switcher can only produce an output current of 20A. A datasheet states that the switching converter can output 14.4V volts at its maximum. At least 591mV voltage is output by the voltage controller.
TPS40193DRCRG4 Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Enable, Power Good
PULSE WIDTH MODULATION
TPS40193DRCRG4 Applications
There are a lot of Texas Instruments TPS40193DRCRG4 DC to DC converter applications.
- Motor controller circuits
- Solar power plants
- Automatic plug-in machines
- Ball screw pair
- ATMs
- Smoke exhaust equipment
- CNC system
- Radio equipment
- Analog precision reference circuits
- Planers
