TPS40193DRCTG4
| Parameters | |
|---|---|
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 26.109911mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Max Output Current | 20A |
| Operating Supply Voltage | 18V |
| Input Voltage-Nom | 12V |
| Temperature Grade | INDUSTRIAL |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Current - Output | 20A |
| Quiescent Current | 2.5mA |
| Frequency (Max) | 360kHz |
| Max Output Voltage | 14.4V |
| Voltage - Output | 14.4V |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 300kHz |
| Max Input Voltage | 18V |
| Control Technique | PULSE WIDTH MODULATION |
| Min Output Voltage | 591mV |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 85 % |
| Height | 900μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TPS40193DRCTG4 Overview
1 outputs can be generated with the dc motor controller. An enclosure of Tape & Reel (TR) is used to package the PMIC. The switching controller is capable of switching at the 300kHz position. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. There are a DUAL terminal on the switching converters. 10 terminations with various dc switching's functions. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's input voltageis 12V volts. The switching converter has a total of 10 pins. Specially, switching converter corresponds to type Switching Regulator or Controllers. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 18V. At least -40°C°C is recommended. DC regulator should run at a temperature of 85°C more than 85°C degrees Celsius. A total of 1 functions are present in the switch converters. In dormant mode, 2.5mA is used. A voltage regulators switching with 10 pins is designed. Maximum frequency of the controller is 360kHz. Users must limit the voltage accordingly because the dc switcher's maximum input voltage is 18V. This is an ideal solution for switching controllers with 20A inputs. It outputs a voltage of 14.4V when working normally. A voltage of 4.5V is required for the supply. DC switcher will not be able to provide an output current above 20A volts. As per its datasheet, the switching converter has a maximum output of 14.4V volts. Neither the voltage controller's lowest voltage output 591mVr its highest voltage output is less than 591mV.
TPS40193DRCTG4 Features
Switching Frequency: 300kHz
PULSE WIDTH MODULATION
TPS40193DRCTG4 Applications
There are a lot of Texas Instruments TPS40193DRCTG4 DC to DC converter applications.
- Motor controller circuits
- Access control systems
- Telecommunications equipment
- Driver circuits
- Die casting equipment
- Printing
- Textile machinery
- ATMs
- Computed tomography (CT)
- Smoke exhaust equipment
