TPS40195RGYT

16 Terminals 4.5V~20V 16-Pin TPS40195 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 100kHz~600kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-TPS40195RGYT
Package: 16-VFQFN Exposed Pad
Datasheet: -
Stock: 521
Description: 16 Terminals 4.5V~20V 16-Pin TPS40195 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 100kHz~600kHz Transistor Driver (Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mounting Type	Surface Mount
Package / Case	16-VFQFN Exposed Pad
Surface Mount	YES
Number of Pins	16
Weight	37.194574mg
Operating Temperature	-40°C~125°C TJ
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	16
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	TPS40195
Function	Step-Down
Number of Outputs	1
Qualification Status	Not Qualified
Output Voltage	17V
Output Type	Transistor Driver
Max Output Current	20A
Operating Supply Voltage	20V
Input Voltage-Nom	12V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	20A
Voltage - Supply (Vcc/Vdd)	4.5V~20V
Quiescent Current	4mA
Control Features	Current Limit, Enable, Frequency Control, Power Good, Soft Start
Max Output Voltage	17V
Topology	Buck
Min Input Voltage	4.5V
Control Mode	VOLTAGE-MODE
Frequency - Switching	100kHz~600kHz
Max Input Voltage	20V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	Yes
Min Output Voltage	591mV
Switcher Configuration	PUSH-PULL
Max Frequency	580kHz
Duty Cycle (Max)	85%
Height	1mm
Length	4mm
Width	3.5mm
Thickness	900μm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TPS40195RGYT Overview

It comes in a 16-VFQFN Exposed Pad package, so switching controller can be used for most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. Transistor Driver dc switching's outputs (s) can be handled by it. The supply and operating voltage of the dc control are 4.5V~20V. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. The switching controller is capable of switching at the 100kHz~600kHz position. It is suitable for general dc dc regulator when it is set to Surface Mount. The dcdc regulator features Current Limit, Enable, Frequency Control, Power Good, Soft Start for efficient switching control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. Terminal (s) of the switching converters are designed at the QUAD position. A variety of 16 terminations are available in dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's input voltageis set to 12V. A search for "TPS40195" will reveal other relevant dc to dc converter ics. In total, switching converter has 16 pins. As determined by the test statistics, the output voltage of DC regulator is 17V. If you are starting a new project, you should note the dc dc regulator's typical output current is 20A. There is a maximum frequency of 580kHz on this dc regulators. It is suggested that users apply 20V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. In a dormant state, the dc switching uses 4mA. The maximum input voltage of dc switcher is 20V, so users should limit their voltage accordingly. The supply voltage must be 4.5V. Input current cannot exceed 20A with this dc switcher. The switching converter can output 17V volts at its utmost, according to the datasheet. voltage controllers with a minimum voltage output of 591mV cannot operate.