TPS40195RGYTG4

16 Terminals 4.5V~20V 16-Pin TPS40195 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 100kHz~600kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-TPS40195RGYTG4
Package: 16-VFQFN Exposed Pad
Datasheet: -
Stock: 749
Description: 16 Terminals 4.5V~20V 16-Pin TPS40195 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 100kHz~600kHz Transistor Driver (Kg)

Inquiry Now

Details

Tags

Parameters
Operating Supply Voltage	20V
Input Voltage-Nom	12V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	20A
Voltage - Supply (Vcc/Vdd)	4.5V~20V
Quiescent Current	4mA
Control Features	Current Limit, Enable, Frequency Control, Power Good, Soft Start
Max Output Voltage	17V
Topology	Buck
Min Input Voltage	4.5V
Control Mode	VOLTAGE-MODE
Frequency - Switching	100kHz~600kHz
Max Input Voltage	20V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	Yes
Min Output Voltage	591mV
Switcher Configuration	PUSH-PULL
Max Frequency	580kHz
Duty Cycle (Max)	85%
Height	1mm
Length	4mm
Width	3.5mm
Thickness	900μm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Mounting Type	Surface Mount
Package / Case	16-VFQFN Exposed Pad
Surface Mount	YES
Number of Pins	16
Weight	37.194574mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	16
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.5mm
Base Part Number	TPS40195
Function	Step-Down
Number of Outputs	1
Output Voltage	17V
Output Type	Transistor Driver
Max Output Current	20A

TPS40195RGYTG4 Overview

In the 16-VFQFN Exposed Pad package, the switching controller meets most application requirements. There is enough capacity in the dc motor controller to generate the output for the 1 input. Tape & Reel (TR) solid enclosure protects the pmic. There are Transistor Driver dc switching's output (s) that it can handle. DC control operates at 4.5V~20V volts and has 4.5V~20V supply voltage. Work well in dc switchers with a -40°C~85°C TA. With this switching controller, you can switch at 100kHz~600kHz. dc dc regulator is made easier with Surface Mount. Current Limit, Enable, Frequency Control, Power Good, Soft Start is used for efficient switching control in the dcdc regulator. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. QUAD are the position of the terminal of the switching converters. A variety of dc switching's functions can be performed on 16 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 12V is input. TPS40195 can be used to locate other relevant dc to dc converter ics. There are only 16 pins on switching converter. As determined by the test statistics, the output voltage of DC regulator is 17V. In most cases, the output current of the dc dc regulator will be 20A, so note that when you start the project. DC regulator's maximum frequency is 580kHz. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 20V. The dc switching utilizes 4mA when it is in a dormant state. The maximum input voltage of dc switcher is 20V, so users should limit their voltage accordingly. In order to use a 4.5V voltage supply, switching controller is necessary to have one. DC switcher will not be able to provide an output current above 20A volts. Datasheets indicate that the switching converter can output 17V volts at its maximum. Neither the voltage controller's lowest voltage output 591mVr its highest voltage output is less than 591mV.