TPS40200D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | TPS40200 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 16V |
| Output Type | Transistor Driver |
| Max Output Current | 3A |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~52V |
| Quiescent Current | 1.5mA |
| Control Features | Frequency Control, Soft Start |
| Max Output Voltage | 46V |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 35kHz~500kHz |
| Max Input Voltage | 52V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 700mV |
| Switcher Configuration | SINGLE |
| Max Frequency | 500kHz |
| Duty Cycle (Max) | 95% |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40200D Overview
This switching controller fits most application requirements since it is packaged in a 8-SOIC (0.154, 3.90mm Width) package. dc motor controller is suitable for 1 output generation. PMIC packaging is solid with a Tube enclosure. With Transistor Driver dc switching's output (s), it is able to handle it. The supply and operating voltage of the dc control are 4.5V~52V. Qualified to work in a -40°C~85°C TA dc switcher. With this switching controller, you can switch at 35kHz~500kHz. A generalization of dc dc regulator can be made using Surface Mount. In order to control switching efficiently, the dcdc regulator features Frequency Control, Soft Start. SWITCHING CONTROLLER analog IC connects the switch converters. There are a DUAL terminal on the switching converters. An array of 8 terminations of dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. A search for "TPS40200" will reveal other relevant dc to dc converter ics. There are a total of 8 pins on switching converter. DC regulator outputs 16V voltage based on test statistics. normally, the dc dc regulator's output current is 3A, which you should keep in mind when starting a project. 500kHz is the maximum frequency of this dc regulators. DC switching uses 1.5mA when it is dormant. In order to ensure the dc switcher's functionality, users must limit the voltage to 52V due to the dc switcher's maximum input voltage. Voltage 4.5V must be supplied. The dc switcher will not provide an output current greater than 3A. Datasheets state the switching converter can output up to 46V volts. A voltage controller's lowest output voltage cannot be less than 700mV.
TPS40200D Features
Transistor Driver Outputs
Switching Frequency: 35kHz~500kHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
TPS40200D Applications
There are a lot of Texas Instruments TPS40200D DC to DC converter applications.
- Shearing machines
- Flexible manufacturing cells
- Injection molding machinery
- Post equipment
- Flaw detection equipment
- Wind power
- Sensitive electronic devices
- Handheld GPS
- USB circuits
- Adjustable voltage or current linear circuits
