TPS40200DG4

8 Terminals 4.5V~52V 8-Pin TPS40200 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 35kHz~500kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-TPS40200DG4
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 382
Description: 8 Terminals 4.5V~52V 8-Pin TPS40200 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 35kHz~500kHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Weight	72.603129mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Frequency	300kHz
Base Part Number	TPS40200
Function	Step-Down
Number of Outputs	1
Output Voltage	46.8V
Output Type	Transistor Driver
Max Output Current	3A
Input Voltage-Nom	12V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	2.5A
Voltage - Supply (Vcc/Vdd)	4.5V~52V
Quiescent Current	1.5mA
Control Features	Frequency Control, Soft Start
Max Output Voltage	46V
Topology	Buck
Min Input Voltage	4.5V
Control Mode	VOLTAGE-MODE
Frequency - Switching	35kHz~500kHz
Max Input Voltage	52V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	No
Nominal Input Voltage	12V
Min Output Voltage	700mV
Switcher Configuration	SINGLE
Max Duty Cycle	95 %
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TPS40200DG4 Overview

Capsuled in the 8-SOIC (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. This dc motor controller can be used to generate outputs with 1 numbers. An enclosure of Tube is used to package the PMIC. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sDC control operates at 4.5V~52V volts and has 4.5V~52V supply voltage. Worked in a -40°C~85°C TA dc switcher before. The switching controller is capable of switching at the 35kHz~500kHz position. dc dc regulators can be carried out with Surface Mount. Frequency Control, Soft Start provides dcdc regulator efficient switching control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. A variety of dc switching's functions can be performed on 8 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. You can find other relevant dc to dc converter ics by searching "TPS40200". Switching converter has a total of 8 pins. DC regulator outputs 46.8V voltage based on test statistics. It's important to remember that the dc dc regulator's normaloutput current is 2.5A, so you should note it down when starting a new project. The maximum duty cycle of this voltage regulator dc to dc is set to 95 % to ensure reliability during power-up and power-down. Switching controller operates at a frequency of 300kHz. In a dormant state, the dc switching uses 1.5mA. A nominal working status is achieved when the input voltage is set to 12V. The maximum input voltage of the dc switcher is 52V, so users need to limit the voltage accordingly. There must be a 4.5V supply voltage. In this case, the dc switcher won't produce more than 3A watts of output current. Its datasheet indicates the switching converter can output a maximum of 46V volts. At its lowest voltage, the voltage controller does not produce less than 700mV.

TPS40200DG4 Features

Transistor Driver Outputs
Switching Frequency: 35kHz~500kHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 95 %
Frequency: 300kHz