TPS40200DR
| Parameters | |
|---|---|
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | TPS40200 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 46.8V |
| Output Type | Transistor Driver |
| Max Output Current | 3A |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~52V |
| Quiescent Current | 1.5mA |
| Control Features | Frequency Control, Soft Start |
| Max Output Voltage | 46V |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 35kHz~500kHz |
| Max Input Voltage | 52V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 700mV |
| Switcher Configuration | SINGLE |
| Max Frequency | 500kHz |
| Duty Cycle (Max) | 95% |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
TPS40200DR Overview
The switching controller fits in the 8-SOIC (0.154, 3.90mm Width) package and is ideal for most applications. 1 outputs can be generated with the dc motor controller. There is a Tape & Reel (TR) solid enclosure around the pmic. The system can process Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 4.5V~52V. Worked in a -40°C~85°C TA dc switcher before. With this switching controller, you can switch at 35kHz~500kHz. The Surface Mount value makes it suitable for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Frequency Control, Soft Start. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. The switching converters's terminal (s) are designed at DUAL . 8 terminations with a variety of function. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. A DC switcher's nominal voltage of 12V is input. In addition to "TPS40200", there are other relevant dc to dc converter ics you can find. There are a total of 8 pins on switching converter. Statistically, the DC regulator outputs 46.8V voltage. If you start a project, note down the dc dc regulator's usual output current of 3A. DC regulator has a maximum frequency of 500kHz. In a dormant state, the dc switching uses 1.5mA. The maximum input voltage of this dc switcher is 52V, so users must limit the voltage accordingly. A voltage of 4.5V must be present in the supply. There will be 3A output current greater than 3A from the dc switcher. Datasheets indicate that the switching converter can output 46V volts at its maximum. At its lowest voltage, the voltage controller does not produce less than 700mV.
TPS40200DR Features
Transistor Driver Outputs
Switching Frequency: 35kHz~500kHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
TPS40200DR Applications
There are a lot of Texas Instruments TPS40200DR DC to DC converter applications.
- Household control circuits
- Digital precision reference circuits
- Lathes
- Solar power plants
- Alternators
- Automatic testing equipment
- Boring machines
- Elevator lighting
- Series voltage regulation circuits
- Combined machine tools
