TPS40200DRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | TPS40200 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 46.8V |
| Output Type | Transistor Driver |
| Max Output Current | 3A |
| Operating Supply Voltage | 52V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~52V |
| Quiescent Current | 1.5mA |
| Control Features | Frequency Control, Soft Start |
| Max Output Voltage | 46V |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 35kHz~500kHz |
| Max Input Voltage | 52V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 700mV |
| Switcher Configuration | SINGLE |
| Max Frequency | 500kHz |
| Duty Cycle (Max) | 95% |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40200DRG4 Overview
Capsuled in the 8-SOIC (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. For 1 outputs, the dc motor controller is appropriate. PMIC is packaged in a solid enclosure of Tape & Reel (TR). It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThis dc control operates at 4.5V~52V and has a 4.5V~52V supply voltage. Suitable for working in an dc switcher that has a -40°C~85°C TA. With this switching controller, you can switch at 35kHz~500kHz. The Surface Mount value makes it suitable for general dc dc regulator. Frequency Control, Soft Start provides dcdc regulator efficient switching control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. There are a DUAL terminal on the switching converters. 8 terminations with various dc switching's functions. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's voltage input of 12V. A search for "TPS40200" will reveal other relevant dc to dc converter ics. The switching converter has a total of 8 pins. Based on the test statistics, DC regulator outputs voltage 46.8V. If you are starting a new project, you should note the dc dc regulator's typical output current is 3A. DC regulator500kHz has the maximum frequency. It is suggested that users apply 52V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. When the dc switching is dormant, it uses 1.5mA. Users must limit the voltage accordingly because the dc switcher's maximum input voltage is 52V. The supply voltage must be 4.5V. DC switchers cannot produce output currents greater than 3A. The switching converter can output 46V volts at its utmost, according to the datasheet. Lowest voltage output of the voltage controller must be greater than 700mV.
TPS40200DRG4 Features
Transistor Driver Outputs
Switching Frequency: 35kHz~500kHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
TPS40200DRG4 Applications
There are a lot of Texas Instruments TPS40200DRG4 DC to DC converter applications.
- Surge protection circuits
- Window air conditioners
- Communication system
- Program control systems
- Automation technology
- Power supplies of electronic gadgets
- Electric heating, lighting
- Flaw detection equipment
- Terrestrial set-top boxes
- Network technology
