TPS40200MDREP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -55°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.7 TO 45.24V; 5 VOLT OUTPUT ALSO AVAILABLE |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | TPS40200 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 45.24V |
| Output Type | Transistor Driver |
| Max Output Current | 3A |
| Operating Supply Voltage | 52V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~52V |
| Quiescent Current | 1.5mA |
| Control Features | Frequency Control, Soft Start |
| Max Output Voltage | 46V |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 35kHz~500kHz |
| Max Input Voltage | 52V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 700mV |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 500kHz |
| Duty Cycle (Max) | 95% |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40200MDREP Overview
With its 8-SOIC (0.154, 3.90mm Width) package, the switching controller fits the needs of most applications. This dc motor controller can be used to generate outputs with 1 numbers. PMIC is packaged in a solid enclosure of Tape & Reel (TR). It is capable of handling Transistor Driver dc switching's outputs (s). 4.5V~52V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where -55°C~125°C TJ is the -55°C~125°C TJrm. The switching controller is capable of switching at the 35kHz~500kHz position. As it has a Surface Mount value, it can be used for general dc dc regulator. Featured in the dcdc regulator is Frequency Control, Soft Start which allows efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. There are a terminal (s) on the switching converters that are designed at DUAL. An array of 8 terminations of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's input voltageis 12V volts. In addition to "TPS40200", there are other relevant dc to dc converter ics you can find. The switching converter has a total of 8 pins. As determined by the test statistics, the output voltage of DC regulator is 45.24V. The dc dc regulator's usual output current is 3A, which should be noted down when you start a project. The max frequency of the pmic can reach 500kHz. This value is ALSO OPERATES IN ADJUSTABLE MODE FROM 0.7 TO 45.24V; 5 VOLT OUTPUT ALSO AVAILABLE so that DC to DC voltage regulator better serves the purpose. When running the voltage regulator dc to dc in a circuit, users should apply 52V to ensure safety and reliability. A dc switching in a dormant state uses 1.5mA. The dc switcher's maximum input voltage is 52V, so users must limit the voltage accordingly. There must be a 4.5V supply voltage. There will be 3A output current greater than 3A from the dc switcher. Datasheets indicate that the switching converter can output 46V volts at its maximum. A voltage controller's lowest output voltage cannot be less than 700mV.
TPS40200MDREP Features
Transistor Driver Outputs
Switching Frequency: 35kHz~500kHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.7 TO 45.24V; 5 VOLT OUTPUT ALSO AVAILABLE
TPS40200MDREP Applications
There are a lot of Texas Instruments TPS40200MDREP DC to DC converter applications.
- Shearing machines
- Lathes
- Post equipment
- Access control systems
- Power supplies of electronic gadgets
- Medical equipment
- Flaw detection equipment
- Product testing
- Sink circuits
- USB circuits
